Jump to content
SAU Community

Recommended Posts

I believe there were some they didn't come with hicas as there is a powersteer pump available without hicas.

Most likely the n/a base model.

I'm probably wrong though as I don't know for sure.. Just something I vaguely remember.

I found heaps of R33's that didn't have HICAS, & they were factory original.

When I bought mine it was the only one I'd found with the system on it & these were only just complied cars we're talking about here too. The setup is actually a bit different & lacks the adjustments for toe that the HICAS type rear end has.

Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2707798
Share on other sites

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

- re-instate abs control function. (doesent have abs.. IDIOT) supply report stating operation ok

Hmm, I thought this one interesting, but I suppose it part and parcel with inspector inconsistencies.

When my car went through, I had the ABS fault light ON (I've turned it off due to common problems with it) in orange on the dash and no comment was made about it. ABS shouldn't matter if you can pass the breaking test.

Best of luck

Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2708498
Share on other sites

Hmm, I thought this one interesting, but I suppose it part and parcel with inspector inconsistencies.

When my car went through, I had the ABS fault light ON (I've turned it off due to common problems with it) in orange on the dash and no comment was made about it. ABS shouldn't matter if you can pass the breaking test.

Best of luck

i have passed the breaking test.

thanks helso for the offer, when i can find the hicas i may take you up on that. :D

dam, they system is setup to focus more on the technicality than the practicality!

Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2709391
Share on other sites

Yeah bud, if there's a lock bar in place, we could do a swap. The only problem I forsee is that it requires a wheel alignment to be done after the swap, so if you wanted the bar back, you'd have to get two alignments done. For a time frame, I'd go with Nozila's estimate, but, now that I've done one, I think I could shave a half an hour to an hour off of it

Edited by heslo
Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2710729
Share on other sites

thats true, once you 'crack' the bolts so to speak, its alot easier to unbolt and re-bolt. i didnt have that luxury as i stated, i was first time the bolts were unbolted. but since you have (i presume) a lock bar then your bolts would be easy as to undo. pain in the back side none the less. wheel alignment is highly advised.

Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2710855
Share on other sites

maybe it would be easier to just borrow one thats already off, wanna lend me yours nozila?

i have to replace my battery in my boot with a dry cell batters i have been quoted $480 for one.

wat the hell this is bullshit, F@#K this government. seriously!

Edited by DriftR_33
Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2711010
Share on other sites

Yeah, it's screwed up but what can we do? If you don't want to swap with mine and get a replacement that you can use, I'm still more than willing to lend a hand.

thanks mate for willing to help me... :)

my mate found me a r33 hicas today and have installed it. cost me nothing HAHA :D:)

Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2722137
Share on other sites

. We need cops that stop crime instead of discriminantely fleecing certain members of the public & making them out to be the crims instead.

true ^^

1 of the reasons why i sold my old 33gtr years ago...they pulled me over and gave me a fine for changing lane @ a roundabout (glenelg) near the revolving restaurant. Another time they pulled me over to search for my 2 bov, but being stupid noobs, they couldnt find them, bov are under the engine bay in GTRs.

just anything they could find, they'll make that extra effort to fine/defect u

while the real bad guys are still out there doing the real damage

so bl jase, just a bad day out @ kfc :D

Edited by andz69
Link to comment
https://www.sau.com.au/forums/topic/139443-defected/page/5/#findComment-2722158
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • They are, a good friend of mine bought one to replace his blow factory turbo, running a Toshi Tune reflash. Just use their supplied water/oil lines and you're good to go. At the time, they were like $900 delivered.
    • This is an option for 100% bolt on, the GCG high flow -  https://gcg.com.au/turbo-charger-upgrade-skyline-gtst-2iu-xtrgts-s1.html Also, I'm pretty sure hypergear does a high flow that is 100% bolt on, it just doesn't make as much power as their bigger high flows.  Even if you get a hypergear turbo that requires you to chance the intake piping, it is a really simple modification. It can be as simple as a piece of silicon hose and you pop a filter on the end. It doesn't have to be some crazy pie cut titanium work of art intake pipe.  If you have the ability to swap the turbo yourself, you would be able to sort the intake piping out. 
    • Just as a thought, if it's in neutral, thats your drive line disconnect, not the clutch. Clutch slip at the dyno with pedal fully out, is actually adding a second disconnect. So it's not a clutch issue if you're in neutral. Just a bit of friction dragging the output around while in the air.
    • The HG high flow is excellent, and costs about the $$ you're talking about. But it, and probably every other highflow, uses a diffeent core than the original turo, and the original Hitatchi core is quite long. So, I think it is inevitable that there is likely no such thing as a highflow that just "bolts on" with no other effort required. And the same is likely true for HG's outright replacement "bolt on" turbos (the ATR things). And the same is likely true for anything similar from elsewhere. I have no idea if the cheap Chinese/Taiwanese complete turbos from eBay/Temu/etc are as bolt on as they claim. I mean, they claim the bolt onto the NAs as well as the turbos, and we know that can't be "bolt on". But it wouldn't matter because I'm not buying a $169 4 psi turbo for anything other than a paddock basher.
    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
×
×
  • Create New...