Jump to content
SAU Community

Painting Intercoolers

masTers

By masTers,
in Western Australia

 Share

Recommended Posts

thrtytwo Veteran

thrtytwo

Posted
Posted

this has been covered a few times, general consensus is that it doesnt effect performance positively or negatively, i personally would suggest using a matte black as opposed to a gloss as i would assume gloss would be thicker, just go back and forth doing light coatings with a spray can and that should do the trick, im doing it this way myselkf as soon as i get the time.

mitchy_ Grand Master

mitchy_

Posted
Posted
Guys i wanna paint my front mount black (mainly for cosmetic reasons) anyone else done this? what is the best paint to do? or am i better off taking it to a panel beater and getting them to hit it with the black?

Steve

you need blingy chrome behind that red bar steve :D

Kaido_RR Grand Master

Kaido_RR

Posted
Posted
Guys i wanna paint my front mount black (mainly for cosmetic reasons) anyone else done this? what is the best paint to do? or am i better off taking it to a panel beater and getting them to hit it with the black?

Steve

hurry up and find out!

alpinestars want to know already

i want mine pink
SR32 Rising Star

SR32

Posted
Posted

Are you doing the whole cooler black or stencil?

If you want a good job get some decent paint (dont get supacrap). And prep is very important. Are you going to prime it?

The only downside I can see is that it'll attract the heat.

Instead of matt (bunky) or gloss we've got satin black in the shop and it's top quality paint imported from germany. It's artist paint and it's formulated to help noobs get less drips :)

Kaido_RR Grand Master

Kaido_RR

Posted
Posted
Are you doing the whole cooler black or stencil?

If you want a good job get some decent paint (dont get supacrap). And prep is very important. Are you going to prime it?

The only downside I can see is that it'll attract the heat.

Instead of matt (bunky) or gloss we've got satin black in the shop and it's top quality paint imported from germany. It's artist paint and it's formulated to help noobs get less drips :)

you would think that painting it black would attract the heat but it doesnt :)

there is some engerinning behide it but i forget it hehee

Silent Proficient

Silent

Posted
Posted
Are you doing the whole cooler black or stencil?

If you want a good job get some decent paint (dont get supacrap). And prep is very important. Are you going to prime it?

The only downside I can see is that it'll attract the heat.

Instead of matt (bunky) or gloss we've got satin black in the shop and it's top quality paint imported from germany. It's artist paint and it's formulated to help noobs get less drips :)

Matt black will stik to anything with great results as it has lesser of a paint base, just make sure it free of any grease or wax coatings. get yourself some wax and grease remover/prep wash. There is no need to prime it as you want the paint thin as possible so it does not act as a insulator.

Any can of matt black paint will work, no need expensive imported paint that "helps you get less drips" .

Nice even coats will be the key.

Kaido_RR Grand Master

Kaido_RR

Posted
Posted
Yr 10 physics lets us know that black will work best. But as i said, its purely cosmetic! Thanks guys or the feed back guys. Ill smash up some photos once all is done. Might even try to get it out on a cruise sometime soon :)

wanna paint mine at the same time?

i do audio u do paint?

deal f**ker :)

SR32 Rising Star

SR32

Posted
Posted

No primer - no base protection...so the paint will be more prone to getting imperfections (rocks/chips/scratches).

Hey hey hey, who ever said the german paint is more expensive...and more expensive than what? (It's cheaper than dulux, less high pressure than dulux and you get interchangable spray nozzles to adjust the type of spray and flow) and i wouldnt go anywhere near export paint, fades like there's no tomorrow)

I just can't get into matt black on cars.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...