Jump to content
SAU Community

Recommended Posts

More questions. I started collecting the required parts but need to clarify a couple more things from anyone who's done this:

1. Can I reuse my original auto gearbox mount and cross member with the manual box? Both are R34.

2. Can I reuse my original auto shifter trim and just add a leather gaiter for the manual shifter? The cutout in the manual trim seems a bit bigger (see photos below), I'm just wanting to make sure that there's enough space for the shifter to move.

3. There's a fair bit of tar and grime inside the bellhousing of the manual gearbox that's going in and it's sitting pretty tight, what's the best way to clean that up?

Thanks guys!

13164627415_c6d7986e64_z.jpg

Edited by V28VX37

To answer your questions after doing the conversion myself to my R34:

1) The Auto cross member and mount can be re-used

2) Yes, you can use your auto shifter trim. the shifter should not foul against it. I re-used mine. I bought a new leather gear boot and stapled velcro to the edges. Then I stuck 3m adhesive velcro to the underside of the shifter trim so the shifter boot stuck onto the trim.

3) Yes, you should clean the inside of the bellhousing, as you don't want that stuff in between your clutch. I used a wire brush, water, plenty of degreaser. Alternatively, oven cleaner or JIF could help

To answer your questions after doing the conversion myself to my R34:

1) The Auto cross member and mount can be re-used

2) Yes, you can use your auto shifter trim. the shifter should not foul against it. I re-used mine. I bought a new leather gear boot and stapled velcro to the edges. Then I stuck 3m adhesive velcro to the underside of the shifter trim so the shifter boot stuck onto the trim.

3) Yes, you should clean the inside of the bellhousing, as you don't want that stuff in between your clutch. I used a wire brush, water, plenty of degreaser. Alternatively, oven cleaner or JIF could help

Fantastic, thanks mate, that's brilliant info!!

Ok more questions... I've ordered a new inner rubber boot for the gear lever as it's torn. How do I remove the wider top part of the lever to get it on there? It seems like it's glued on or something.

Also, am I meant to have a white nylon bush on the bottom knob of the lever? Where can I get one of those in Melb?

13287266113_0b835ce471_z.jpg

Edited by V28VX37

that top bit unsrews, i got my.nylon bush from nissan, make sure u get a r34 one as r33 ones are bigger and very similar part number. i'll see if i can find the part number.

Thanks. I'm not being very successful in unscrewing the top part, it seems like there's some rubber mounting between it and the bottom part?

Just Jap lists the Nylon bush as 32861-H7301, can anyone confirm if that is correct for the R34?

Thanks. I'm not being very successful in unscrewing the top part, it seems like there's some rubber mounting between it and the bottom part?

Just Jap lists the Nylon bush as 32861-H7301, can anyone confirm if that is correct for the R34?

Had the same issue 3 months ago, the top part WON'T come off, so stop trying!

The boot is installed from the top (where the shift knob screws on). This description is going to sound a little weird, so bear with me :-o Lubricate the small hole & the shaft With a lubricant (oil or water based, as long as its slippery). Guide the shaft into the small hole, OK, enough, the small hole of the boot WILL stretch over the widest part of the shaft without tearing. I had my doubt's, but it does go over easily with a good amount of lube.

Yes you need a bush on the bottom of the shifter. You could enquire with gktech.com if they have a solid brass bush for the R34's. Some people like the improved shift feel they provide, but I'd stay with the factory nylon.

  • Like 2

Ok that worked a treat, the new dust boot is now in place. For future reference the Nissan part number is 32862 (BOOT RUBBER C/L). About $10 + postage off eBay.

I also got the nylon bush from a local Nissan dealership, the part number is 32861-H7301 (BUSH CONTROL LE) - this is for R34, R33 is different. Just Jap also sell these: http://justjap.com/index.php/genuine-nissan-gear-shifter-lower-bush-nissan-s13-silvia-a31-cefiro-r31-r32-gts-and-gts-t-r33-gts-and-r34-gt-t-and-gt-r.html

One more question: How do you install the circlip that holds the upper plastic ring (and the gear lever) in place? Mine seems pretty loose but there's probably a trick to make it work.

One more question: How do you install the circlip that holds the upper plastic ring (and the gear lever) in place? Mine seems pretty loose but there's probably a trick to make it work.

So this part:

13496932943_ffc116ce39_z.jpg

  • 2 weeks later...

Looks like I'm missing another circlip/lock ring, see below, any idea where to get one in Melb/Aus?

These too are available from your local Nissan dealership, part number is 32204-V5004 (RING-SNAP).

  • 2 weeks later...

That second ring looks like it could be a back up ring that would sit underneath the circlip, cant be too sure, as I didn't pay too much attention when I did mine. :unsure:

You need a pair of INSIDE circlip pliers, like these:

circleclip-pliers-i-L.jpg

Straight will probably be the go. Just pop the shifter in, put it in third, squeeze the circlip & snap it into the groove. Where the gap sits doesn't matter too much, just make sure you put it in an easy spot to get access to it if you need to!

Mine was alittle loose in the groove, so don't stress. Maybe mine was missing the back up ring!!!

  • Like 1

Thanks 533 RYC!

The conversion is partially done but they've hit a snag with the hydraulics ... Does anyone know if R33 and R34 clutch master cylinders are interchangeable?

If not, is there an easy way to tell which one I've got (based on a photo)?

Cheers

What dramas are you having?

So you've got an R34 GTT gearbox?

Did you use all R34 hydraulic parts?

What are the sizes are the Master cylinder & slave cylinder?

I'm not sure if R33 & R34 parts are interchangeable, as R33 is push type & R34 is pull type.

Seeings as the R34 GTT is a pull type, when refitting the gearbox, it is VERY critical that the input shaft is not bashed around going through the pressure plate. Engagement of the release bearing to the pressure plate is also critical. If it didn't engage properly, this could give you dramas.

Check out this thread if you haven't already found it:

http://www.skylinesaustralia.com/forums/topic/268118-r34-gt-t-clutch-install-guide/

Pictures would be great!

What dramas are you having?

So you've got an R34 GTT gearbox?

Did you use all R34 hydraulic parts?

What are the sizes are the Master cylinder & slave cylinder?

I'm not sure if R33 & R34 parts are interchangeable, as R33 is push type & R34 is pull type.

Seeings as the R34 GTT is a pull type, when refitting the gearbox, it is VERY critical that the input shaft is not bashed around going through the pressure plate. Engagement of the release bearing to the pressure plate is also critical. If it didn't engage properly, this could give you dramas.

Check out this thread if you haven't already found it:

http://www.skylinesaustralia.com/forums/topic/268118-r34-gt-t-clutch-install-guide/

Pictures would be great!

Thanks mate, pics below!

Not sure about master and slave sizes but they're both OEM, just wanting to confirm that they're R34 GTT and not R33 GTS-T.

The workshop has installed and wired everything up but they're having trouble engaging the clutch and asked me whether the master cylinder is an R34 item.

We are using an R34 gearbox and all R34 parts except for an R33 tailshaft front half. Brand new pull type NPC clutch.

13949995770_c8c3a0675a.jpg

13949950337_b9f65c13c6.jpg

14133692712_af5c04e829.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...