Jump to content
SAU Community

Recommended Posts

Hi,

anyone out there running a EBC have problems with power fluctuations on their dyno graph?

This is sorta a continuation from a post i did a few weeks back. Long story short, a no. of ppl mentioned that my power graph(attached) is all over the shop, timing n fuel maps could be out. Ive since spoken to my tuner n he seems to think its becoz im running a EBC. Reason for the unstable power graph is becoz the EBC pulsates alot. To solve it, take it out. Im not too convinced of the explaination given and i dont really want to remove a $460 EBC anyway.

Bass Junky, u posted ur graph the last time, i can see that its way smoother than mine is, wot sorta boost ctrl were u running at the time?

My mods - Power FC with boost ctrl kit, turbobak with split dump, FMIC, pod, BOV.

Cheers.

R34_dyno_Power___AFR.pdf

Edited by G_Force
Link to comment
https://www.sau.com.au/forums/topic/140118-power-fluctuations-with-ebc/
Share on other sites

I have the same prob in my rb25.

It has a HKS EBC on 12.5psi it spiked to 14psi on a warm day on the dyno. T

This effected how much power I mad; as it spiked to 14 it made 211.2rwkw and then drops back to 12.5 to make aroung 205rwkw. However, other than that I had a healthy fuel and power curve.

It will spike more when the air temp is cold as colder air is more dense that hot air; thus give your engine some extra power and a little more stock boost.

Doesn't really seam to be the cause of your problems though. It most likely comes down to tunning errors.

check for exhaust restrictions, once the gate opens it should be stable

so its probably not the controllers fault, the tuner could do some testing to test and prove that theory, other than "its the controllers fault".

try a run with the exhaust dropped off so its just dump then to atmo

see if spikes then, it may reveal a different story as there is no backpressure restriction

Nabil, my tune was done on a warm day.

Paul, im pretty sure there are no restrictions on the exhaust, whole system is practically new, catback i have is a Blitz NUR Spec, one of the highest flowing catbacks on the market, when u look down the pipes, u can see straight thru to the other end. Cat is a Catco large body from BATMBL, split dump also from BATMBL.

I'll be seeing my tuner next week but i just wanted a 2nd opinion on the problem.

Cheers.

When people say spiking, they mean that it ramps up to say 14psi and then backs off to 12.

Your tuner seems to be implying that the boost is Fluctuating.

Different things....

My mistake... i exagerated it by saying spiking, fluctuations would be the more precise term. Either case, i havent heard of anyone else having this problem caused by an EBC. One would think that incorrect timing n fuel maps would be the more likely caus of it. Anyone else agree?

Ask your tuner for a graph of Power Vs Boost.

This will be a very good indication of how the boost is performing.

Thanks for the pm's Bass. Somehow i still didnt receive the timing maps u were trying to send me, maybe there was a problem with the upload?? Anyway, appreciate the help. Perhaps email it to me. I'll pm u my email.

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...