Jump to content
SAU Community

Oh Snap. Literally. Two Wheel Nuts Have Snapped.

Sauce

By Sauce,
in Australian Capital Territory

 Share

Recommended Posts

Sauce Experienced

Sauce

Posted
Posted

Well... Shit. Just what I needed. Noticed a wierd noise coming from the rear left of my car as I was leaving work. The frequency of the noise is relative to how fast or slow the car is going, so I figure it's something to do with the wheel. When I get home I find this:

ohsnap1.jpg

Missing nuts? What the hell? Upon closer inspection...

ohsnap3.jpg

ohsnap.jpg

Two of the bolts have snapped clean off, leaving the thread down in the hub bit. I have no idea how this could have happened. It's got me absolutely buggered. I don't throw the car around very hard because I know my suspension, being still stock and 160,000km old isn't exactly A1 (which is why I'm saving for new suspension parts. I'm not exactly the most loaded guy out). Does anyone have any idea how something like this could happen? And more importantly, what I'm going to have to do to fix this? I'm assuming that I should keep the car off the road until this is sorted, because I don't exactly feel safe knowing my wheel nuts could seemingly just snap off for no apparent reason. What the hell should I do aside from obviously buy a new set of nuts (for the wheels :devil:)? I really didn't need another problem.

:wave:

Amaru Veteran

Amaru

Posted
Posted (edited)

Poor wheel balance/alignment can cause it, but it has to be pretty bad. Otherwise spacers or someone using the wrong wheel nuts and threading the stud, and forcing the nut on/off can cause them to crack and after a while driving they will oh snap.

Edited by Amaru
Scooby Veteran

Scooby

Posted
Posted (edited)

curious. i would recommend pressing the studs out, your wheels bearings will not thank you otherwise.

any sign of damage to the other wheel nuts? may be that last time you got new tyres some monkey with a rattle gun cross threaded them and then torqued them to within an inch of their life and cracked and just fell out, but it's still really strange.

i'm surprised that it made a noise though, wheels will hold on with only two nuts sometimes as it's the hub that takes the weight, the nuts just hold the wheel to it. noise usually means the wheel is loose.

as nik says poor fitting spacers will also kill them.

i'd check the other nuts out, seems almost as though someone is playing a nasty trick.

Edited by Scooby
Sauce Experienced

Sauce

Posted
  • Author
Posted (edited)

Hmm.. Ok, thanks for that guys. I guess my biggest concern is: can it actually be driven? I work in phillip but live in belco. If it can be driven I can probably get it looked at pretty much straight away and get what's needed since I work for a nissan dealership, I'm just scared as hell that the remaining wheel nuts could snap off too, seeing as it's happened twice.

I honestly don't think my wheel alignment is to blame, because it certainly wasn't/isn't that bad. I think there may be spacers on there, but I'm not 100% as I've never actually had any cause to take the wheels off myself. Guess what I'll be doing tommorow :laugh:

Edited by Sauce
n15m0 Grand Master

n15m0

Posted
Posted

just taking a stab in the dark but do u have aftermarket wheels on ur car? If yes, check that the hub diameter of the wheel matches ur hub, it its bigger, then u need hub rings. Take it to a wheel shop n they should be able to tell u if u need them or not. If ur wheel hub diameter is bigger than ur hub, its actually putting stress on ur studs.

TurboX Mentor

TurboX

Posted
Posted
just taking a stab in the dark but do u have aftermarket wheels on ur car? If yes, check that the hub diameter of the wheel matches ur hub, it its bigger, then u need hub rings. Take it to a wheel shop n they should be able to tell u if u need them or not. If ur wheel hub diameter is bigger than ur hub, its actually putting stress on ur studs.

What n15m0 said is, I would be willing to bet, is the problem!

There seems to be many Skyline owners with non standard wheels running on the studs instead of the central hub rings.

It makes a lot of difference to the handling and safety of your car if ithe wheels are not a snug fit on the hubs.

CHECK your wheels now guys!

Duncan Grand Master

Duncan

Posted
Posted
they have been over tightened at one point in there life, most probably from a rattle gun...

totally agree....over torqued in the past weakened them, maybe together with an incorrect size hub ring on aftermarket wheels.

Anway....assuming the nuts are still tight it will be safe to drive (carfeully) to a local tyre shop they can check out the other studs and replace those ones for you.

And when they are finished if you see them tighten them with a rattle gun ask what the wheel nuts were torque to....nissan says 110nm.

I have seen a whole wheel fall off a race car from overtightened wheel nuts....it made the car real hard to drive.

SkyGTRline Mentor

SkyGTRline

Posted
Posted

Had similar problem...

Can be caused by the wheel nuts comin loose..

Mine did that... had funny noise coming from front left wheel couldnt work it out. then noticed nuts were loose, touched one and it snapped..

just an idea.

Psymon Mentor

Psymon

Posted
Posted

I had a similar problem not long ago. Heard a weird noise from the rear end and pulled over to have a look, two nuts were missing, one stud was snapped and the other three nuts were loose. Seems weird this would happen to only one wheel when i tightened them all exactly the same way.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • wizlb
      Who has a Infiniti Q60, Q50 (V37)?

      By wizlb · Posted

      I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Kinkstaah
      Starting again

      By Kinkstaah · Posted

      Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...