Jump to content
SAU Community

Recommended Posts

That sux i missed the dyno day!

Does anyone know where i can go to do 2 dyno runs (low boost and high boost) on the sunny coast that is reliable and not a rip off???

Thanks.

well there is chapmans at cooroy, ron hill automatics also have a dyno, barnes high performance have one aswell. there is probably a few more but i cant think of, if u just want a power run then go to any of them, tuning is a different story i think.

Some mates of mine were chatting the other day, and they asked me why they have not seen any of the sunny coast cars at the skid days I run in Gympie.. I had to be honest with them and say I don't know!

could somebody fill me in?? After all, it is in your back yard.

I wont be upset if you don't like that sort of thing, but i would like to give them something..

cheers

Edited by psi
Some mates of mine were chatting the other day, and they asked me why they have not seen any of the sunny coast cars at the skid days I run in Gympie.. I had to be honest with them and say I don't know!

could somebody fill me in?? After all, it is in your back yard.

I wont be upset if you don't like that sort of thing, but i would like to give them something..

cheers

We've been going to the Cooloola Car Club days as they have been holding Motorkhana events with a point system... If you read the link below, you'll see why I PM'd you about wether you held a Motorkhana points system event as well.

http://www.skylinesaustralia.com/forums/in...=172257&hl=

Hey guys, i really want/need a new front bar for my r33, cause the stock one looks meh... and i want to fit an intercooler.

Anywhere here in the sunny coast to pick one up? preferably like a msport style...

cheers.

try online traders and get one's shipped up by courier to noosa, that ya best bet, wont cost to much.

http://www.dmdtheimage.com

Thanks for that! Will get on to them today.

Bring on the msports front bar :)

ill be there fri sat & sunday morning & sat night too :bunny:

Didn't know one was on...

Not sure thou... iv'e gotta paint my rear calipers tomorrow, did the front last weekend, looks mint, blue calipers, gold wheels.

Whats crackin Daz???

Thanks for coming down to the dyno day, has been a while!

yeah it was a good day even though i got there late, but still was a few nice cars there. alot of us form up the sunny coast are heading up to noosa today to go watch the hillclimbs, and road circuits. should be fun.

not sure to be honest, get a group of us together and see where we go from there :rant: . its the BP next to the grammer school cause i know there is a few BP's in forest Glen. Will be waiting for approx 15min for everyone to turn up so get there on time!

Edited by Darkness_Ryda1
how did ya cruise end up going?

I went since they meet a couple of mins from my house. I stayed for about 10mins then left cuz commodores joined in and there was a lancer there who did a skid on the niklin way and thought it was cool. idiot! i didn't want to be seen with them and i left. dont know how the rest of it went?!? any one booked? lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...