Jump to content
SAU Community

Recommended Posts

Wondering what people have to say about 17" tyres for Skylines ?? (for normal street use)

Which Brand ?

Which type/model ?

What profile ?

How Wide ?

What cost ?

How long they last (typically)

Where is the best (cheapest) place to buy ?

Cheers,

BF

Link to comment
https://www.sau.com.au/forums/topic/1407-tyres-what-do-people-use/
Share on other sites

i havnt got the 17's but ive got the 16's version..

the tire ive found to be the best bang for bux is the dunlop fm901, yes thye also come in 17's as ONARUN also has em.. i got my 16's for about 190bux.. so 17's shouldnt be all that more..

and i wont give u an idication on how long they last.. as my driving wont give a good indication in regards to tire ware:D

there awesome things.. and very well priced..

i have ultra radials

17"x9" 235 45's on all corners

$205 a tyre there really hardie as they still look brand new and i've done 60,000km on them only about 3% where to the tread depth.

the only problem they are really hard compound and are extremely slippery in the wet.

FM901's don't last long as they are made of a soft compound. they are very grippy so good for trackwork and excellent for road use. they like to bite the road and then let go all of a sudden. you don't get the screeching indication before they let go like other tyres. if you want something that will last you look for a harder compound than that of the 901's.

To contradict Porgie in the above post I would have to say that the Dunlop FM901's wear quite well.

I've got them in 235/45 17 and 255/40 17. Put them on the car in March for $1240 fitted and ballanced.

They are a bit noisy (road rumble), but never squeal and I was very happy with the communication and grip at Eastern Creek and Wakefield.

Apart from one of the rears de-laminating after about 400 km :eek: (Dunlop replaced it without too much fuss at no charge) I am happy with them.

I'm running Yoko's a-spec. You can' buy them at normal tyre places as they aren't DOT approved. But hell they grip very well. I've got 255/40/17 all round on mine. Paid about 280 a piece at Eagle tyres in Granville. Considering I'm quite aggressive on the track, they seem to be doing the job very well.

Fatz has e-specs, and they look evil. I might try to source them next.

Originally posted by red900ss

Apart from one of the rears de-laminating after about 400 km :eek: (Dunlop replaced it without too much fuss at no charge) I am happy with them.

what's de-laminating?

my driving has seen them wear out quickly and the fact that they are a soft compound indicates a shorter life

Yo George

Deliminating is when the rubber starts to pull away from the carcass.

Andrew

Falken Ziex's on mine, on standard rims....Very happy with the grip, I can't wait till I get 17's thou......Might try some new rubber, whats Falkens high line tyre called ? GRB ? What are they like ?

Andrew

the carcass is a cavans type material, probably canvass which nthe rubber is attached to. I'm using my knowledge of kart tyres here...they don't have steel belts, i think the steel belt is either in the rubber or wound into the canvass....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...