Jump to content
SAU Community

Recommended Posts

Hi All

I recently purchased a car from [edited] in japan. It took more than 4 months for the car to get here after it was sent to the wrong port in Japan, then two days before the car arrived i discovered the chassis number i was given for the import approval was different from the car on the ship. It cost me another $200 for a new import approval (thank goodness it went through quickly) and storage on the dock while the approval went through.

I went to look at the car at the compliance workshop and guess what IT WAS THE WRONG CAR luckily it was pretty similar but i had to spend $2000 extra on fixing things broken and damaged.

[edited] promised to pay for the approval and dock mix up, which they didn't and when i asked them to pay for the damage to be fixed (as i was told the car was not damaged) they said they were checking and never got back to me.

So the car is hopefully on the road next week and wish me luck nothing else goes wrong

cheers Si

Link to comment
https://www.sau.com.au/forums/topic/140703-problems-with-a-company/
Share on other sites

thats f**ked. why did you even pay for the damage to be fixed? had you already paid for the full purchase price?

I had to pay for it to be fixed to get complianced and yeah i had already paid the price for car i guess i took a risk and got burnt thats life just wanted to warn others so it didn't happen to them, anyway looking forward to driving it next week hopefully its all ok on the road

This is the reason why you should always purchase cars through a compliance workshop rather than through one of the internet companies. While they offer good cars from time to time, in most cases it is too good to be true and car's are coming over with damage and missing parts they should have had. Buying car's through a compliance workshop in most cases works out to be cheaper and you can ensure that you will get a decent car, otherwise you have someone else to hold responsible for it.

Thats my 2 cents.

This is the reason why you should always purchase cars through a compliance workshop rather than through one of the internet companies. While they offer good cars from time to time, in most cases it is too good to be true and car's are coming over with damage and missing parts they should have had. Buying car's through a compliance workshop in most cases works out to be cheaper and you can ensure that you will get a decent car, otherwise you have someone else to hold responsible for it.

Thats my 2 cents.

Bollocks, I've seen some compliance companies buy absolute rubbish cars with accident damage beacuse they can comply em on the sly and get away with it... (give engineer a bottle of scotch, turn him around 6 times and suddenly you've got a signature on the compliance paperwork).... then they turn it around and sell it to clients as totally pristine cars. Also most compliance workshops use japanese agents to buy cars from... just like everyone else.

^^ probably dodgy compliance shops!!

go to a well known trusted one and you wont have any issues at all..

for sure... but its the bad ones that ruin it for the rest.

check out www.raws.org.au its a organisation for RAWS workshops, the ones that are members of this body are one's I'd deal with any day because they're by the book and can be trusted.

for sure... but its the bad ones that ruin it for the rest.

check out www.raws.org.au its a organisation for RAWS workshops, the ones that are members of this body are one's I'd deal with any day because they're by the book and can be trusted.

good to hear ...i joined this month :D

Bollocks, I've seen some compliance companies buy absolute rubbish cars with accident damage beacuse they can comply em on the sly and get away with it... (give engineer a bottle of scotch, turn him around 6 times and suddenly you've got a signature on the compliance paperwork).... then they turn it around and sell it to clients as totally pristine cars. Also most compliance workshops use japanese agents to buy cars from... just like everyone else.

Hence for that reason you should always use a well known and reliable workshop. Compliance workshops normally use the same agents over and over again to source them cars. So it is in the best interest of the agent not to find the cheapest car but the ones of best quality to ensure that they continue to be used.

In the case that the car arrives in terrible condition you have the workshop to be held responsible for incorrect information being supplied to the customer. A certain internet company (not j-spec) that many of my friends have bought R32's through have recieved cars with blown motors, blown turbo's, missing parts and severe amounts of rust. That said it was complied under the old 15 year rule, which allowd a lot of dodgy car's to make there way onto australian roads.

Yes I have seen cars been put on road by dodgy compliance companies but that said, a car imported by the workshop and then sold in australia abides under australian law. Also you can also get a third party inspection to ensure the car is in good condition. But when it's bought through an internet company, most of these companies have there contracts set so that if a car arrives in a different condition to the information supplied to there customer they cannot be held liable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
    • Cam seals go hard. It's a very old car.
×
×
  • Create New...