Jump to content
SAU Community

Recommended Posts

Hi All

I recently purchased a car from [edited] in japan. It took more than 4 months for the car to get here after it was sent to the wrong port in Japan, then two days before the car arrived i discovered the chassis number i was given for the import approval was different from the car on the ship. It cost me another $200 for a new import approval (thank goodness it went through quickly) and storage on the dock while the approval went through.

I went to look at the car at the compliance workshop and guess what IT WAS THE WRONG CAR luckily it was pretty similar but i had to spend $2000 extra on fixing things broken and damaged.

[edited] promised to pay for the approval and dock mix up, which they didn't and when i asked them to pay for the damage to be fixed (as i was told the car was not damaged) they said they were checking and never got back to me.

So the car is hopefully on the road next week and wish me luck nothing else goes wrong

cheers Si

Link to comment
https://www.sau.com.au/forums/topic/140703-problems-with-a-company/
Share on other sites

thats f**ked. why did you even pay for the damage to be fixed? had you already paid for the full purchase price?

I had to pay for it to be fixed to get complianced and yeah i had already paid the price for car i guess i took a risk and got burnt thats life just wanted to warn others so it didn't happen to them, anyway looking forward to driving it next week hopefully its all ok on the road

This is the reason why you should always purchase cars through a compliance workshop rather than through one of the internet companies. While they offer good cars from time to time, in most cases it is too good to be true and car's are coming over with damage and missing parts they should have had. Buying car's through a compliance workshop in most cases works out to be cheaper and you can ensure that you will get a decent car, otherwise you have someone else to hold responsible for it.

Thats my 2 cents.

This is the reason why you should always purchase cars through a compliance workshop rather than through one of the internet companies. While they offer good cars from time to time, in most cases it is too good to be true and car's are coming over with damage and missing parts they should have had. Buying car's through a compliance workshop in most cases works out to be cheaper and you can ensure that you will get a decent car, otherwise you have someone else to hold responsible for it.

Thats my 2 cents.

Bollocks, I've seen some compliance companies buy absolute rubbish cars with accident damage beacuse they can comply em on the sly and get away with it... (give engineer a bottle of scotch, turn him around 6 times and suddenly you've got a signature on the compliance paperwork).... then they turn it around and sell it to clients as totally pristine cars. Also most compliance workshops use japanese agents to buy cars from... just like everyone else.

^^ probably dodgy compliance shops!!

go to a well known trusted one and you wont have any issues at all..

for sure... but its the bad ones that ruin it for the rest.

check out www.raws.org.au its a organisation for RAWS workshops, the ones that are members of this body are one's I'd deal with any day because they're by the book and can be trusted.

for sure... but its the bad ones that ruin it for the rest.

check out www.raws.org.au its a organisation for RAWS workshops, the ones that are members of this body are one's I'd deal with any day because they're by the book and can be trusted.

good to hear ...i joined this month :D

Bollocks, I've seen some compliance companies buy absolute rubbish cars with accident damage beacuse they can comply em on the sly and get away with it... (give engineer a bottle of scotch, turn him around 6 times and suddenly you've got a signature on the compliance paperwork).... then they turn it around and sell it to clients as totally pristine cars. Also most compliance workshops use japanese agents to buy cars from... just like everyone else.

Hence for that reason you should always use a well known and reliable workshop. Compliance workshops normally use the same agents over and over again to source them cars. So it is in the best interest of the agent not to find the cheapest car but the ones of best quality to ensure that they continue to be used.

In the case that the car arrives in terrible condition you have the workshop to be held responsible for incorrect information being supplied to the customer. A certain internet company (not j-spec) that many of my friends have bought R32's through have recieved cars with blown motors, blown turbo's, missing parts and severe amounts of rust. That said it was complied under the old 15 year rule, which allowd a lot of dodgy car's to make there way onto australian roads.

Yes I have seen cars been put on road by dodgy compliance companies but that said, a car imported by the workshop and then sold in australia abides under australian law. Also you can also get a third party inspection to ensure the car is in good condition. But when it's bought through an internet company, most of these companies have there contracts set so that if a car arrives in a different condition to the information supplied to there customer they cannot be held liable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...