Jump to content
SAU Community

Recommended Posts

Hi All

I recently purchased a car from [edited] in japan. It took more than 4 months for the car to get here after it was sent to the wrong port in Japan, then two days before the car arrived i discovered the chassis number i was given for the import approval was different from the car on the ship. It cost me another $200 for a new import approval (thank goodness it went through quickly) and storage on the dock while the approval went through.

I went to look at the car at the compliance workshop and guess what IT WAS THE WRONG CAR luckily it was pretty similar but i had to spend $2000 extra on fixing things broken and damaged.

[edited] promised to pay for the approval and dock mix up, which they didn't and when i asked them to pay for the damage to be fixed (as i was told the car was not damaged) they said they were checking and never got back to me.

So the car is hopefully on the road next week and wish me luck nothing else goes wrong

cheers Si

Link to comment
https://www.sau.com.au/forums/topic/140703-problems-with-a-company/
Share on other sites

thats f**ked. why did you even pay for the damage to be fixed? had you already paid for the full purchase price?

I had to pay for it to be fixed to get complianced and yeah i had already paid the price for car i guess i took a risk and got burnt thats life just wanted to warn others so it didn't happen to them, anyway looking forward to driving it next week hopefully its all ok on the road

This is the reason why you should always purchase cars through a compliance workshop rather than through one of the internet companies. While they offer good cars from time to time, in most cases it is too good to be true and car's are coming over with damage and missing parts they should have had. Buying car's through a compliance workshop in most cases works out to be cheaper and you can ensure that you will get a decent car, otherwise you have someone else to hold responsible for it.

Thats my 2 cents.

This is the reason why you should always purchase cars through a compliance workshop rather than through one of the internet companies. While they offer good cars from time to time, in most cases it is too good to be true and car's are coming over with damage and missing parts they should have had. Buying car's through a compliance workshop in most cases works out to be cheaper and you can ensure that you will get a decent car, otherwise you have someone else to hold responsible for it.

Thats my 2 cents.

Bollocks, I've seen some compliance companies buy absolute rubbish cars with accident damage beacuse they can comply em on the sly and get away with it... (give engineer a bottle of scotch, turn him around 6 times and suddenly you've got a signature on the compliance paperwork).... then they turn it around and sell it to clients as totally pristine cars. Also most compliance workshops use japanese agents to buy cars from... just like everyone else.

^^ probably dodgy compliance shops!!

go to a well known trusted one and you wont have any issues at all..

for sure... but its the bad ones that ruin it for the rest.

check out www.raws.org.au its a organisation for RAWS workshops, the ones that are members of this body are one's I'd deal with any day because they're by the book and can be trusted.

for sure... but its the bad ones that ruin it for the rest.

check out www.raws.org.au its a organisation for RAWS workshops, the ones that are members of this body are one's I'd deal with any day because they're by the book and can be trusted.

good to hear ...i joined this month :D

Bollocks, I've seen some compliance companies buy absolute rubbish cars with accident damage beacuse they can comply em on the sly and get away with it... (give engineer a bottle of scotch, turn him around 6 times and suddenly you've got a signature on the compliance paperwork).... then they turn it around and sell it to clients as totally pristine cars. Also most compliance workshops use japanese agents to buy cars from... just like everyone else.

Hence for that reason you should always use a well known and reliable workshop. Compliance workshops normally use the same agents over and over again to source them cars. So it is in the best interest of the agent not to find the cheapest car but the ones of best quality to ensure that they continue to be used.

In the case that the car arrives in terrible condition you have the workshop to be held responsible for incorrect information being supplied to the customer. A certain internet company (not j-spec) that many of my friends have bought R32's through have recieved cars with blown motors, blown turbo's, missing parts and severe amounts of rust. That said it was complied under the old 15 year rule, which allowd a lot of dodgy car's to make there way onto australian roads.

Yes I have seen cars been put on road by dodgy compliance companies but that said, a car imported by the workshop and then sold in australia abides under australian law. Also you can also get a third party inspection to ensure the car is in good condition. But when it's bought through an internet company, most of these companies have there contracts set so that if a car arrives in a different condition to the information supplied to there customer they cannot be held liable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...