Jump to content
SAU Community

How Much Is My Car Worth?

Viscount

By Viscount,
in Engines & Forced Induction

 Share

Recommended Posts

Viscount Community Regular

Viscount

Posted
Posted

Hey all,

After owning my R34 25GT for just under 2 years, I have been tossing up the idea of possibly selling my car to buy an R33 GTS-T, or going to other way, and buying an every day driver that will be cheaper to insure.

I was wondering, how much I could get for my car roughly, given that it has done < 47,000km, been in no major accidents, has been serviced every 6 months since I got it, has had the coils replaced recently, and has no major aesthetical blemishes, apart from a snapped drivers rain guard (which I might replace), and a few blemishes on the front bar, which would come off with some plastic polish.

Apart from that, it's in perfect condition!

I am expecting a few "look it up in the classifieds" responses, but to be honest, there are none on the market which I can find, which makes it difficult to price it...

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/141121-how-much-is-my-car-worth/
Share on other sites
GTR Power Collaborator

GTR Power

Posted
Posted

17 grand?? i think you can get better than that.. is it manual or tip tronic?.. depending on this and judging buy the low ks if its a coupe i think your looking at around at least 18 going up to 19 500...sedan will be significantly less, then i would agree with the 17 max figure... i went to about 3 dealerships just last weekend looking for a 25gt coupe, tip tronic no less that 19 999 with around 50 000ks, manual was going for 21 000 with a little less ks.. these are really starting to get popular due to P plater laws, so i doubt it will be to hard to sell.. where abouts you from btw? any chance sydney area, lol id love to take a look at it

Maxx Veteran

Maxx

Posted
Posted
wtf? how come no-one has mentioned the YEAR of the car? Shiit a 1998 and a 2001 model 25GT will command VERY different prices!
not really, there is barley any difference between the years, there are a few adds on car sales and drive etc, that have a 2000model r34 25gt for 19 999 and 1998 models go for the same

he is talking about a 2001, which is series 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...