Jump to content
SAU Community

Recommended Posts

hey guys, my RB30DET needs the valve springs changed but its too hard for me to do so i want to pay for someone to do them but none of the well known/big workshops wanna do it due to the fiddliness of it. so i'm looking for a small workshop perhaps, reasonably close to metro adelaide that you persoannly would recommend/let work on your car and wouldn't mind a small challenge.

cheers in advance, Ash!

by the way don't tell me to rip the head off and do them cause i really don't wanna and i've already asked Shaun @ boostworx and he said he wouldn't do it!

I too have rung around all the major Adelaide workshops and they don't want a bar of it.

Rip the head off they say. If you find some one to do it, my plans may change.

heheh don't want to give it a shot yourself after the cam gear install???? :laugh:

Chris Milton Engineering are the blokes who did the work on my head.

They too said to rip the head off. They only wanted $100 to fit the springs up but wouldn't touch it with the head on the car.

Reason being.. A custom tool is required to be made and really doing the springs on these heads is a pain in the arse.

I'll probably end up ripping the head off and have them do a valve grind while its there, its done almost 45,000km's so it could do with one.

pity his workshop is far from reasonably close to metro adelaide :)

Some maps say Gawler is metro. Most say Munno Para is metro so Gawler is "close". :)

Personally being non metro is fine by me :) Means i can get my car in whenever i want!

could give Dave from The Motor Shop a try

i did work experiance with him many many many ma.. well u get the picture

edit

Motor Shop, The

14 Dewer Ave Ridgehaven 5097

(08) 8264 1972

Edited by Madaz
I too have rung around all the major Adelaide workshops and they don't want a bar of it.

Rip the head off they say. If you find some one to do it, my plans may change.

heheh don't want to give it a shot yourself after the cam gear install???? :)

ye, if i can't even get that right who knows what i'd do trying to install these.

Should offer Andrew (sky30) $100 to do them seeing as he's done them before! hehe!

rang motor shop and john moyle race engines, both said they wouldn't even want to attempt it so i then rang rhemac and they said ye we'll give it a go but i wouldn't get much change from $800 (i don't think so). mmmmmmmmmm dunno what to do!

lol @ $800.

Bugger that.

As that horrid saying goes Ash.. Suck and see.

Push the boost in to it and see how she goes. Your springs have been shimmed up where as sky30 and my won weren't.

Bl4ck32 has had no issues on 16psi with his spring shimmed.

So give it a go. :ninja:

Shaun shouldn't charge much for a retune on more boost as it should only take two hrs including cam gears.

As much as you don't want to hear it, if the shops won't touch it without the head off, then I sure as heck wouldn't be trying it myself.

It sucks to have to take the head off, but if you break a spring and do further damage the cash it would have cost you to fix might seem like chicken feed.

If I remember your dyno graph, you should be right to try and save some cash up, as it only looked like a problem right up top (which is not surprising for valve springs).

If you do end up having to take the head off though, I know I'm the sort of person who couldn't put it back on without some tickling.

I know I hate it when the two choices that I have are ones that I think both suck - "she'll be right" or "big cash bummer".

If you do end up having to take the head off though, I know I'm the sort of person who couldn't put it back on without some tickling.

lol thats my problem. I've already had the head cleaned up with valve deshroud and mild in/exh porting, I wouldn't mind doing a little more work to the exh. side of things. :)

Was that price from Rhemacs to re skim the head as well? They do tend to be more expencive but i've always found they do more as well, they don't do things by halves. The price probably included all new gaskets and seals etc. add labour onto that and it's probably not too bad.

Was that price from Rhemacs to re skim the head as well? They do tend to be more expencive but i've always found they do more as well, they don't do things by halves. The price probably included all new gaskets and seals etc. add labour onto that and it's probably not too bad.

All though Ash asked for valve springs to be done without the head coming off the $800 price is probably to cover incase they had to rip the head off. ;)

It is fairly pricey. Definitely worth the work doing mine myself. Miltons only want to charge me $100 to fit valve springs up so I'll have them do it + throw a different set of cams in and maybe a little more work to the heads exh. side. Hell its all apart anyway.

I'm happy with the head work Miltons did on mine last time, there was a noticeable difference before and after by just feeling around, and the main thing. The economy is pretty damn good being close to what the rb20det used to get. I was a tad worred about porting etc as I had heard a few horror story's of it buggering up economy. ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drilled the rubber out on a slow speed and it didn't catch much at all. Probably only half a dozen holes was enough to shred the rubber and it dropped off easily leaving the inner sleeve behind. Will tackle that later
    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
×
×
  • Create New...