Jump to content
SAU Community

6boost Rb20/rb25det Manifolds

croat

By croat,
in Group Buys

 Share

Recommended Posts

croat Mentor

croat

Posted
Posted

I have organised a group buy through 6boost on calaisturbo.com.au for his manifolds. these can either be hi or low mount rb(20/25/26/30) manifolds. the flange on the manifold can either be t3 or t25. Fot those of you with other than rb engines contact me if you wish for a manifold and i can work out a price and include you in the group buy.

This group buy is set end on 30th November 2006 where the manifolds will be ordered and when completed dispatched. all that is required is a $100 deposit by the 30/11/06. Depending on numbers it will take approximately 2 weeks for your manifold to be completed.

These manifolds are hands down the best on the market. i have looked into and spoken to people that have used his manifolds and have had only 100% positive comments. Below is a link to his thread on calaisturbo where you can read up on the product.

http://www.calaisturbo.com.au

The normal retail price for one of these maniflds is $1200, which comes with a fitting kit with turbo gasket and new studs and nuts for head and turbo flanges, and manifolds also come with a lifetime warranty.

As for a group buy price:

- 3 manifolds = $1000

- 5 manifolds = $900

Any questions just post up here.

Boro.

post-749-1162607225.jpg

post-749-1162607237.jpg

post-749-1162607248.jpg

Link to comment
https://www.sau.com.au/forums/topic/141777-6boost-rb20rb25det-manifolds/
Share on other sites
croat Mentor

croat

Posted
  • Author
Posted

flysky and woolls are you both in? cuz that makes 3.. that is the minimum requirement. let me know what you guys are after. manifold for what engine/flange type, external/internal gate etc.. thanks.

Nabil Rising Star

Nabil

Posted
Posted (edited)

manifold.doc

Hey I would like one for a top mount rb25 with external wastegate outlet on it like this one here.

How much is postage? Can i pick it up? With T3 flange please.

Edited by Nabil
Cubes Grand Master

Cubes

Posted
Posted
me too in a low mount

I've had a small discussion with 6boost some time ago regarding the making of a lowmount manifold for the dohc. He wasn't interested as he couldn't use his collector. Such a pitty as any low mount he could put together would be better than the current ebay types. I suggested something along the lines of a HKS manifold design but he just wasn't interested. :)

So many of us DOHC heads buy those ebay things too, if only something in low mount was available.

woolls Experienced

woolls

Posted
Posted
I've had a small discussion with 6boost some time ago regarding the making of a lowmount manifold for the dohc. He wasn't interested as he couldn't use his collector. Such a pitty as any low mount he could put together would be better than the current ebay types. I suggested something along the lines of a HKS manifold design but he just wasn't interested. :)

So many of us DOHC heads buy those ebay things too, if only something in low mount was available.

:P thanks for letting me know cubes

croat Mentor

croat

Posted
  • Author
Posted

waz. no i dont have pics. i have messaged 6boost but have had no reply. if you are intending on keeping stock turbo not too much point in getting one of these manifolds. im not 100% sure he will maintain stock positioning with the manifold.

Color_Of_Green Enthusiast

Color_Of_Green

Posted
Posted
I've had a small discussion with 6boost some time ago regarding the making of a lowmount manifold for the dohc. He wasn't interested as he couldn't use his collector. Such a pitty as any low mount he could put together would be better than the current ebay types. I suggested something along the lines of a HKS manifold design but he just wasn't interested. :(

So many of us DOHC heads buy those ebay things too, if only something in low mount was available.

yeah

I had a low mount ordered but was sent back due to flange facing up instead of away from engine... so isnt really possible with their collector. :P

Someone should take on the HKS design..

woolls Experienced

woolls

Posted
Posted
yeah

I had a low mount ordered but was sent back due to flange facing up instead of away from engine... so isnt really possible with their collector. :(

Someone should take on the HKS design..

Can you still buy hks low mounts for rb25?

eSKiMo Apprentice

eSKiMo

Posted
Posted
do you have any picks of the low-mount type for an rb20 with T3 flange (so basically setup with turbo in same position as stock etc.)

cheers,

Warren

would be very interested in seeing a pic of the low mount rb20 with t3 as well... runnning a trust td-05 kit though :)

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...