Jump to content
SAU Community

Recommended Posts

It's an R32 GTS-t an an unusual Grey colour 2-door coupe as you can see. I am the first owner in Australia so it has been well taken care of. I recently had a Vertex bodykit fitted to this baby and sprayed (came out awesome). The car rolls on 18" G-Max dish rims in Shadow Chrome with Chrome Dish, and are stopped by high-performance brake pads with cross-drilled discs. The car is equipped with a DVD/MP3 player, hooked up to a TV... all powered by a Kicker Amp+Sub with Pioneer speakers all-around. Has Nismo Seat-Belt pads and i'm currently on the hunt for Nismo seat-covers to complete the look of a beautiful car.

The car has ALWAYS been well looked after as my cousin is a mobile-mechanic and regularly services the car and teaks everything to perfection. I have a hybrid-copy Intercooler + Piping, with a HKS 3" turbo-back Exhaust. YES... original HKS turbo-back exhaust. It sounds very quiet from inside the car so no headaches, but gives a loud roar from outside and looks MASSIVE up close. I bought a Heavy-Duty Cussion-Plate Exeddy Clutch for the car and got it professionally fitted along with flywheel machined. The car has a pod-filter, and a turbo straight out of an R33 that has no shaft movement. The RB25 turbo has only been in for afew months and only upgraded for a slight power increase. It constantly runs on about 9-10psi without boosting anything... just the modifications. An autometer sports-comp boost gauge was fitted inside the cabin.

I purchased a brand new battery for the car about a month ago as the battery died at the Panel-Beater's while fitting the bodykit. It also has a turbo-timer fitted so discreetly next to the steering wheel that most people wont even notice it. Car is fitted with an alarm/immobiliser with remote-startup. Car has always been started for at least 5 minutes every morning before driven (thats where the remote startup comes in handy).

Looking for around the $14,000 mark with AS IS... Plates, rego and all! Or, will swap for S14 200sx Series 2/WRX, and will consider other turbo cars.

Registration runs out in April 2007 so plenty of time. Number plates are STAWKA (stalker) if the buyer is from Melbourne. Have a clean record with Police so no need to worry, any checks are welcome.

Contact Manny on 0434-64-1177 or [email protected] or just leave a PM. Buyer will not be disappointed.

For Pics, check: http://www.skylinesaustralia.com/forums/in...&album=1203

Edited by stawka
Link to comment
https://www.sau.com.au/forums/topic/141821-r32-gts-t/
Share on other sites

Selling the rims this week. I'll be selling the car for $12,000 with standard R32 wheels+rubber. If you don't want the plates, i'll take them off and will sell trhe car without the wheels and personalised plates for $11,000.

I'm after a stock black/blue/green WRX in manual. Pretty much as stock as possible...

Link to comment
https://www.sau.com.au/forums/topic/141821-r32-gts-t/#findComment-2643478
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...