Jump to content
SAU Community

Recommended Posts

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

RB25 DET HEAD COMPLETE (including Inlet manifold,Coils,Centre Cover,Tappet Covers) $600

You still got this? Is it in good condition, what year engine (series 1 or 2) and does it have VCT?

RB25 DET HEAD COMPLETE (including Inlet manifold,Coils,Centre Cover,Tappet Covers) $600

You still got this? Is it in good condition, what year engine (series 1 or 2) and does it have VCT?

still got this item

and sorry everyone

i havent been all there since someone tried stealing my r33 and smashing it 100 metres away from the workshop

but all items have been sent now

if items are not seen by friday please let me know

all items sent via tnt

  • 2 weeks later...
hey dude, where are my brakes?

hello sorry everyone

tnt are tracing the brakes,plenium and Slimvlts parts

all three packages are traced to the depos

ill ring everyone 2morrow afternoon and let them know where everything is

first time this has happened

ummmmm

i said ill give them to you if i find them

and i didnt but im being nice and once the new ones come in hopefully this week i will send u new ones

im not knocking you mate, your a top bloke, im just a bit frustrated as you said you had posted them and last time i called you said you were going to chase them up and find out where they were and call me back in 10..... now your not answering my calls or sms.... i just want to be kept in the loop, bit frustrating when i was told they bolted straight on and then i find out i need spacers, hub rings and new nuts which i expected at the least..

i'm gonna have to agree with haysey, i'm still waiting for my brakes and i liked to be kept in the loop too, co could you plz pm the con note number

All new items have been sent via post

tnt lost the other items

Bump

all items must go

After the Standard R33 GTST WING S2 does the LED light work also has everyone got there parts is it safe to buy?

Thanks

John

3 people havent

but will either have a money order returned

or there items there by friday

thanks

and i do have the wing

the led works

if u want it organise your own frieght as im having bad luck with mine

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...