Jump to content
SAU Community

Recommended Posts

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

i got in trouble for having one mounted on my dash apparently u arent allowed stuff on your dash

there goes my soft toy collection :)

yeah because it blocks your view apparently

i would have just span some shit like "yeah but so is the rear view mirror...and the steering wheel...and the frame of the car... but people can move their heads you know to see around it."

on the other hand its probably best not to say that.

Edited by Bloodlust
yeah because it blocks your view apparently

i would have just span some shit like "yeah but so is the rear view mirror...and the steering wheel...and the frame of the car... but people can move their heads you know to see around it."

on the other hand its probably best not to say that.

It is apparently an obstruction or distraction for the driver, but you can have the unit mounted on the windscreen if you turn the display off. The current BEL range you can do this and still get the audible/voice alerts so the display really isn't needed anyway.

If the cop wants to say it's a visible obstruction then just move it to the drivers side corner of your dash and tell them that it isn't taking up anymore room there than their in-car K band radar antenna... if they are happy to remove theirs then you will do the same!

  • 4 weeks later...

i recently bought an el-cheapo whistler 1732 detector...my 2 cents

1. driving on highway...beeped twice (possibly from handheld) coz about 1km after..2 cars were pulled over by cops for speeding -dectector was on city mode with all bands turned on

2. detector was on quiet mode...beeped once passing a petrol station...no beeps after ...300yards on..there was a tripod mounted radar....made a u turn...and drove past the radar again ....detector did not give off a signal...u turn again...drove straight past the radar...no signal..but the guy was fiddling with the radar so it prolly wasnt turned on

2 hours later...drove past the radar again...still just the single beep from the petrol station...turned and drove past again...cop was dismantling the radar..so couldnt test further

anyone know what band the tripod mounted radar uses?

Multanova's are Ka band and are supposably the hardest to detect since there so low power. IIRC there on the higher limit or just out of Ka band because they drift so much (and hence aren't that accurate...), the wideband detectors do really well against them.

I bought a shit cobra detector off ebay and it doesn't go off until your right next to the thing... its probably just your detector being shit. The cheap ones are really a waste of money for use with multanova's.

Dan, lasers are only used as handhelds. The tripod thingo's (multanova's) are all radar still. I'm pretty sure those camera's they stick in wheely bins are radar aswell, lidar makes it harder to get all the lanes at once.

GODTHRILA, I need to come see you to do some testing :happy:

Do you have a lidar gun at your work? I have a 'concept' I'm keen to test :P

Dan, lasers are only used as handhelds. The tripod thingo's (multanova's) are all radar still. I'm pretty sure those camera's they stick in wheely bins are radar aswell, lidar makes it harder to get all the lanes at once.

GODTHRILA, I need to come see you to do some testing ;)

Do you have a lidar gun at your work? I have a 'concept' I'm keen to test ;)

The handheld lasers can be mounted to a tripod for further accuracy... they set these up a lot near Mandurah so I am told.

fr0st, just come and see me, we can test your "concept" with our laser

The multinovas are set up and operated by people who are outsourced. They are not official police officers ad have no standing to detain people. All they can do is call for the police.

I just thought they were trained/qualified cops... my bad ;)

The handheld lasers can be mounted to a tripod for further accuracy... they set these up a lot near Mandurah so I am told.

fr0st, just come and see me, we can test your "concept" with our laser

I've never seen a tripod being used before in Perth. As far as I'm aware the max distance they can use lasers at is 400m and still have it hold up in court. Probably wouldn't need a tripod for that, but I haven't used a laser gun before so I can't really comment.

Can you pm/post you business address? It only lists a PO box on your website

Cheers ;)

GODTHRILA, what would you recommend as a good value for money (cheaper ;)) radar detector?

sorry to jack the thread.... but keep an eye out in the for sale section... I might be sorting out something for the forums sooner than you can say "two all beef paties special sauce lettuce cheese pickles onions on a sesame seed bun"

I just thought they were trained/qualified cops... my bad ;)

I've never seen a tripod being used before in Perth. As far as I'm aware the max distance they can use lasers at is 400m and still have it hold up in court. Probably wouldn't need a tripod for that, but I haven't used a laser gun before so I can't really comment.

Can you pm/post you business address? It only lists a PO box on your website

Cheers ;)

I've never seen an eskimo before so they cant exist

or maybe I havent been around enough :)

ok my bad...it was an outsourced person (i.e: no copper uniform...and sitting in a white 4x4....think it is the multinova's ...laser/radar....damned if i knew...bloody thing looked like a friggin missile launcer waiting to blow up any hoon

so what do u guys recommend for detecting multinova's? ...or do they generally trigger off the detector only if its targeted at ya?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • If I had "perfect R33 GTR" kinda money I would have bought one of the crazy expensive low mileage HJA cars, but I am sadly not that wealthy. I already picked this car out of various Skylines for sale locally, most of which were worse in some way. Only a few cars were actually better but also more expensive. In terms of buying a motor locally, I at least have the option to inspect it myself and juding the seller as a person, and used or freshly rebuilt engines that some people sell are actually ok price-wise. I knew the car was going to require work, but shit piled up real fast and I haven't even driven 1000km yet as the turbo started oiling like a bitch within a few weeks after I got the car.   I assume it wasn't actually me who cracked it, though there is no way to know when that crack formed and if the previous owner even knew it was there. Buying another 05U Block can be a gamble, yeah, but the cheapest PRP cast block is like twice or more money-wise, and billet is 3 or 3 times as much. For now I am most likely just keeping the current engine, as a rebuild or engine swap isn't happening right now. But I am seriously considering buying a second engine and selling mine in return. Might be a sweet deal at the end.
    • Hi all. I need some help buying the correct size banjo bolts for my 2860 turbos. Because whoever installed them tore up the original part, I ordered new ones of this kind, because I just figured these were the most leak-resistant option as I already had trouble with a shitty braided line. I need to know the thread size of the smaller left hole, that is the turbo oil feed connection. I found out so far that the turbo oil inlet apparently has a 7/16"-24 thread, but I cannot find any listing or description of the thread size on this line. I do not have the original bolts. I tried using the bolts that were in the turbos (the ones that were mounted with the shitty braided line) but they sit very loosely so they can't be the right thread. Means either these bolts are the wrong ones (how do they fit the turbo then? no clue) or the wraparound-lines have a different thread than the turbo oil feed itself. Help is appreciated, asking Nissan directly is obviously not going to work.
    • EDIT: PSA to whoever stumbles upon this thread. It is in fact a crack in the block that caused this concern. Just letting you know. In my case, a few cm long hairline crack going horizontally above the turbo oil feed. Classic RB shit I guess
    • Might as well pop in some cams, head gasket, head studs, and a flex sensor. Full send.
×
×
  • Create New...