Jump to content
SAU Community

Recommended Posts

Can't you do it yourself?

Its not really that hard to do, it was the first major thing I did to my car on my own. I don't mind coming and helping after exams either if you get stuck.

What FMIC have you got? just a china hybrid copy?

oh really, yeh i was thinking bout asking for help as i dont feel confident myself without instructions :yes:

id put in a carton of your choosing for the time :)

yeh its a hybrid copy, the seller assured me it fits good and other buyers rated it, but thats yet to be seen i guess.

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2663975
Share on other sites

My intercooler was a custom job that the previous owner gave me. It just hooked straight up to the stock piping so I didn't have to run a crossover pipe or anything. The crossover pipe isn't that much of an issue. IIRC the only things you need to do extra is chop the radiator fan a little so it clears the pipe and cut a hole for the piping. To do the hole you need a hole saw, the GTR and GTS-T chassis is the same so there a place all setup to cut.

The reo (front re-enforcement bar) and front bar need to be cut to fit the FMIC in there, its nothing too major that can't be solved with an angle grinder or jigsaw.

If you work fast you could get it done in under a day, mine took me a day and a half being my first time and all. If you do a search I'm fairly sure there are threads with pictures (might be for R33's but its virtually the same) for installs.

Give me 2 weeks and bottle of bourbon (not a beer person :yes:) and I'll come help you out.

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2664049
Share on other sites

My intercooler was a custom job that the previous owner gave me. It just hooked straight up to the stock piping so I didn't have to run a crossover pipe or anything. The crossover pipe isn't that much of an issue. IIRC the only things you need to do extra is chop the radiator fan a little so it clears the pipe and cut a hole for the piping. To do the hole you need a hole saw, the GTR and GTS-T chassis is the same so there a place all setup to cut.

The reo (front re-enforcement bar) and front bar need to be cut to fit the FMIC in there, its nothing too major that can't be solved with an angle grinder or jigsaw.

If you work fast you could get it done in under a day, mine took me a day and a half being my first time and all. If you do a search I'm fairly sure there are threads with pictures (might be for R33's but its virtually the same) for installs.

Give me 2 weeks and bottle of bourbon (not a beer person :)) and I'll come help you out.

sounds liek a deal mate, ive got all the necessary tools !

wats ur poison ? cougar, jim beam ? :P

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2664074
Share on other sites

sounds liek a deal mate, ive got all the necessary tools !

wats ur poison ? cougar, jim beam ? :)

buy him the sphincter of the universe its better :P

or try x speed top racing hyperdrive imports101 amongst a good many other places that can do it

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2664100
Share on other sites

buy him the sphincter of the universe its better :P

or try x speed top racing hyperdrive imports101 amongst a good many other places that can do it

haha ill let him, decide :)

yeh i asked hyperdrive for a quote but they wont touch a copy cooler, fair enough i spose.

after that i asked extreem machines and they wanted about $400, other place said $380. I havnt shopped around a WHOLE lot, thought this would be quicker way to find out :)

thanks for reply though :)

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2664144
Share on other sites

no a standard one

but they are good upgrades for rb20's

i was just making a point that the money you save from installing your fmic means you can buy other goodies.

yeh exactly ! :)

will go towards injectors or fuel pump...or AVCR...or power FC :S

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2664395
Share on other sites

I can remap R32 ECU's aswell (useful arn't I? :P)

Go halves with tiesto in buying me a wideband and I'll do it for ya :)

haha whats a wideband, how much are they ? my guess is a lot ?

will need a remap at some point though

so might need your services :)

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2664434
Share on other sites

haha ill let him, decide ;)

yeh i asked hyperdrive for a quote but they wont touch a copy cooler, fair enough i spose.

after that i asked extreem machines and they wanted about $400, other place said $380. I havnt shopped around a WHOLE lot, thought this would be quicker way to find out :P

thanks for reply though :)

Seriously, i would not use Extreme Machines. Not going into detail but if your going to use a workshop, find another one. Just my 2c

.

Also, isn't Paul at Autoworx in wangars supplying and fitting fmic for around $900 or $950?? Anyone had him fit one? Are the intercoolers any good?

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2664850
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...