Jump to content
SAU Community

Recommended Posts

Obviously you want something fully synthetic- I always use mobil 1, but hear that the top end Motul stuff (6100 or higher, like 300V?) is also very good.

People always complain that its too expensive when doing frequent oil changes, and that you can use cheaper oil because of the fact that its changed frequently (which does sound logical).

But its your engine, and the oil you put in it is all its got, why not give it the best :P

Also i suppose it depends how you drive it. If you redline it all the time, definitly go a good oil like the mobil. If you just cruise/potter it around i dont suppose it would really matter!

While on the topic of oil, can someone explain WHY turbo engines need synthetic oil!?

Cheers, NACHO

Yeah, I use Mobil 1.

I think synth oil can take the heat from the turbo better.

Also synth oil starts to break down at around 125-130 degrees, while the cheaper stuff breaks down at lower temps. That and the fact that the synth has better cold and hot lubricating properties.

J

Go Motul. I changed to 300V at the last change and it feels really good. 2000K and it is still like new, oil is still clear.

If you take the old oil down to the local servo (with mechanic of course, no point taking it to shell select!) and give them 5 bucks i'm sure they can get rid of it for you :)

Guest Oz Elitesport
Originally posted by Xeron

10w-60, u got a bad smoking or leak problem, cause if u dont get a lighter weight, check ur manual for what is recommended for ur areas temperature range, but ull be loosing a few horsies with that oil being so heavy when warm.

I'm using the castrol formula R (10W-60).

This has been recommended by others. Dont have a bad smoking or leaking problem, just took the advise of others.

Oz.

Castrol says this about their Formula R 10W-60 oil:

A full synthetic 10W-60 viscosity engine oil that ensures maximum protection under a wide range of driving conditions and high stress applications. It helps extend the life of your engine as well as minimise oil consumption. Originally developed for endurance sports car engines, it is recommended for highly stressed competition engines and older technology sports cars and luxury sedans.  

SAE 10W-60, API SL/CF, ACEA A3/B3

About the 5W-30 oil they say:

A synthetic 5W-30 viscosity engine oil which enables faster acceleration with excellent engine protection and performance. If offers excellent engine cold start responsiveness and contributes to increased fuel efficiency. Recommended for highly tuned, four cylinder engines and latest technology engines requiring 5W-30 or 10W-30 viscosity. Approved for use by Porsche, VW, Audi and Mercedes-Benz.

SAE 5W-30, API SL/CF, ACEA A3/B3/B4

And the 0W-40:

A full synthetic, free flowing 0W-40 viscosity engine oil that significantly reduces friction, whilst delivering more power, greater protection, reduced emissions and superior fuel efficiency. Recommended for the latest technology and prestige engines, such as Porsche, BMW, Rolls Royce, VW, Audi, Jaguar, Rover and Mercedes-Benz.

SAE 0W-40, API SL/CF, ACEA A3/B3/B4

I can't remember exactly, but I *think* the owner's manual specifies 10W-50 grade oil. That would make the 30 and 40 weight oils a tad too thin. I'll have to check the owner's manual when I get home.

All of these Castrol synthetic oils are of very good quality though so it may not matter too much. Either way, I'm presently using the 10W-60 stuff and I have absolutely no bad things to say about it. The car doesn't use a single drop between oil changes.

If you're changing oil regularly and often, it shouldn't really matter which brand you choose. Just get a good quality fully synthetic oil and you'll be ok. I personally chose Castrol over the Mobil because I like Larry Perkins better than Peter Brock :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...