Jump to content
SAU Community

Recommended Posts

A few people have shown an interest in my new little toy - the Orange TPMS (Tyre Pressure Monitoring System) and wanted to know more about it. I must admit I first heard about it fro Jeff Beable who runs one in his Targa car - but then also was shown 1st hand the effectiveness of them on the Maserati Quattroporte James and I drove which told me about the flat tyre before I realised.

I'll have it on the car this weekend at DECA to get a real feel for how good it is but basically it's a little gadget which has sensors fitted inside all 4 tyres which then provide information on both tyre pressure and tyre temperature to you live in your car. You can also set "alarm" points for low tyre pressure and high temperatures.

I got mine from Bit Distribution in Bayswater for $315 - Bit Distribution

In the last 12 months or so I've managed to delaminate a number of semi-comps on the skidpan basically from over heating - so I'm hoping this will help stop me from doing that. Also - earlier in the year I destroyed a tyre from driving on it flat (sidewalls were so hard I didn't realise it was flat until it was too late).

So pretty much if this thing can save me 1 tyre it will pay for itself. Also it means I don't have to get out and check each tyre regaularly on the track and can also get a better understanding of how quickly tyre temps come up and go down on the track because I can see all the data live. It will also show me if my tyres are overheating due to excess wheel spins on the skidpan.

More information on the unit is available from thr Orange Website here - Orange TPMS

Link to comment
https://www.sau.com.au/forums/topic/143398-tpms/
Share on other sites

Hey Snowy

Ive had TPMS on my 34 for the past 12 months, its a very handy gadget :P

Mine is a little bit different as it displays all tyres at the same time, its seems the one you have displays one at a time

Ive attached a pic of the display, note pic shows tyre pressure in bar but is selectable to psi

Cheers

post-5908-1163674380.jpg

Link to comment
https://www.sau.com.au/forums/topic/143398-tpms/#findComment-2679286
Share on other sites

how much 4 ur one CNBLOW...not that I need it, but I like buying stuff.

actually as Snowy said, I had the issue of driving on some low profiles and it was flat and I didn't know....wellldidn't know until I went around a corner and the tyre came off and I just missed an oncomming truck as I span out...not cool.

Link to comment
https://www.sau.com.au/forums/topic/143398-tpms/#findComment-2679581
Share on other sites

Mine is a little bit different as it displays all tyres at the same time, its seems the one you have displays one at a time

Details would be great,

One of these would have been handy when my tyre went down through the flip flop at calder!

Link to comment
https://www.sau.com.au/forums/topic/143398-tpms/#findComment-2679620
Share on other sites

hey guys

The TPMS i have is direct from the manufacture, i did extensive R & D for more than 6 months on this product alone working in conjuction with the manufacture to get his product 100% (ie software bugs)

If people are intrested in the product, i can try and find out some prices if needed

In the 12 months i have been using it, its never failed once

Link to comment
https://www.sau.com.au/forums/topic/143398-tpms/#findComment-2681898
Share on other sites

hey guys

The TPMS i have is direct from the manufacture, i did extensive R & D for more than 6 months on this product alone working in conjuction with the manufacture to get his product 100% (ie software bugs)

If people are intrested in the product, i can try and find out some prices if needed

In the 12 months i have been using it, its never failed once

hey mate

details...who makes them and roughly how much. where are they located?

the other one Snowman posted is pretty wicked though. Reading through the install manual it looks pretty easy.

Hey Snowy...does the trasmitter sit around the existing tire valve..i.e. the valve stick through...I couldn't work that out. I saw they installed it from inside...not sure how its gonna look I wouldn't mind I pic. The dispay unit looks tops though.

KJ

Link to comment
https://www.sau.com.au/forums/topic/143398-tpms/#findComment-2682911
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
×
×
  • Create New...