Jump to content
SAU Community

Recommended Posts

But if the same copper see's him once, and then 2-3 months later... and with WA plates its a standout for sure.

Questions will be asked... questions you dont really want.

Unless i was mistaken about how the rules work... you cant have a car rego'd in WA and be living in Vic (over 3 months) even if you have a residential address, its not classed as your residence if your not living there permanently

I looked into this a fair bit before taking a contract in WA. The story is that Melb is my home and my place of primary residence....I am simply in WA for work on a temporary basis. As I am returning to Melb when my work is finished here there is no point changing everything to WA stuff, as two weeks later I could be sent home (ah the joys of contracting :no: ).

As a result the '3 month' rule has no application here. Yes it is true what you say about interstate plates sticking out but while I have been here I haven't been pulled over once, so as long as you are not driving like a tool it shouldn't be an issue.

If push comes to shove I guess it would depend on the type of contract/job that Jason is taking in Vic...

Oh and the 100mm rule is the same in Vic and applies from the ground to the lowest point of the vehicle, whether it be exhaust ,chassis or otherwise.

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

If push comes to shove I guess it would depend on the type of contract/job that Jason is taking in Vic...

Oh and the 100mm rule is the same in Vic and applies from the ground to the lowest point of the vehicle, whether it be exhaust ,chassis or otherwise.

I was thinking of saying the same sort of thing if I got pulled over.

It is set to 100mm from the base of the front bar just in front of the front wheels, which seems as the lowest point on the car.

I have a similar sort of question. My car is registered in Victoria (my parents live in Vic and QLD about 50:50 per year, vic in summer and qld during winter) and the car is under my dads name.

I live in NSW now and spend most of my time in NSW with the car.

If i get pulled over in NSW and defected, do i have to go and get it cleared in vic, can they make me? or will i have to get it cleared in NSW?

Do they have any rule about where it is registered if it is my "dads" car and I am just borrowing it if he has a residential address in Vic?

So was it a good experience with the secret or a bad one? :P

The height is sitting on 100mm which is the legal limit here...is it the same in Vic?

Thanks for all the info guys :)

100mm without you in it? Cause 100mm is right on the limit here.

They are allowed to measure it fully laden, so 3 fat cops get in, your gonna be under 100mm.

I would suggest raising it to 120/130mm if you can, it could save you hassle later on

Are you coming over here are a perm contract or what Jason?

My stuff is only worst case. If a cop sees you twice over 4-5 months he will come hassle you. Its just how they are here.

Nice car Jason............Do you look young?

Cause your such a easy target here.

Tell you what you do....as everyone else has said.

Take stickers (shopping list) off...increase your ride height....get 2 resinators fitted to exhaust.

Also, rap your Turbo in a black thermal shield and have the engine bay and all your shinny bits painted black.

This way when they look under your bonnet they won't be blinded by all the polished and Chrome work you

got going on there :P .(Just Kidding) :)

Also you are 21 years of age.. so...power to weight ratio applies in Victoria...not that they(Police) are to interested in that so much.

Good luck

I would suggest raising it to 120/130mm if you can, it could save you hassle later on

Are you coming over here are a perm contract or what Jason?

My stuff is only worst case. If a cop sees you twice over 4-5 months he will come hassle you. Its just how they are here.

I can raise the suspension without much trouble. I work in I.T. so could easily say that I float between the 2 states. Will be looking at either contract or perm

Nice car Jason............Do you look young?

Cause your such a easy target here.

Tell you what you do....as everyone else has said.

Take stickers (shopping list) off...increase your ride height....get 2 resinators fitted to exhaust.

Also, rap your Turbo in a black thermal shield and have the engine bay and all your shinny bits painted black.

This way when they look under your bonnet they won't be blinded by all the polished and Chrome work you

got going on there :P .(Just Kidding) :)

Also you are 21 years of age.. so...power to weight ratio applies in Victoria...not that they(Police) are to interested in that so much.

Good luck

Thanks :) ...I am 31, so probably dont look that young ;)

If you can float, then you can keep it all WA easy enough

Its only if its perma setting that you might find yourself with the more painful issues

If your just a contracting then you should be easily over the line.

Especially if you go back to WA once or twice during the melb visit.

How long you over here for anyways?

You better like beers to mate, as a number of us live near where your aiming for :P

If you can float, then you can keep it all WA easy enough

Its only if its perma setting that you might find yourself with the more painful issues

If your just a contracting then you should be easily over the line.

Especially if you go back to WA once or twice during the melb visit.

How long you over here for anyways?

You better like beers to mate, as a number of us live near where your aiming for ;)

Might be a permanent role, but they wouldn't know that right? I have been thinking of contracting for a while first. There is no time limit, but it could be a few years or more :verymad: The car will then be driven less and less on the road.

No problem with the beer :thumbsup: I dont mind a beer or four at all ;)

just say ur on holidays/work and travel 2 and from all the time... then tell the cop 2 suck u sideways cos there aint crap he can do :verymad:

also out of curiosity if u get pulled over by a cop n he tells u that u need 2 go c the epa in a few days time and u tell him ur going back to perth b4 that date, what happens then?

be prepared for some ass reaming down here

haha what is with the such strict laws there? seems so much stricter than all other states. :(

just say ur on holidays/work and travel 2 and from all the time... then tell the cop 2 suck u sideways cos there aint crap he can do :)

also out of curiosity if u get pulled over by a cop n he tells u that u need 2 go c the epa in a few days time and u tell him ur going back to perth b4 that date, what happens then?

Thats what I was thinking...that if I travel back and forth, and will not be long term permanent in Melbourne then I shouldn't have to switch rego over :P Will see how it goes...if it's bad, she might spend most of the time in the garage...the car that is :D hehe

Man

I was in your situation 2 years ago.

I used lived in Perth and I had a R32 with a RB25DET that was extensively modded (to say the least).

Brought it here to Melbourne when I moved.

After 2 weeks Got dicked with every fine under the sun, no engineering, turbo, management you name it I got reamed. EPA but no defect.

Ended up sending the car back to my parents in Perth and I sold it there.

If you have WA plates it will only give you more attention. They cant defect you, but they can EPA you.

Its really up to you what you wanna do. You should be pretty safe.

brighton has porsches and ferraris - but down beach rd i have seen a fair few imports.

This might be a very long way of doing things, but cant he borrow stock parts, install them, get the car registered and what not and then put back the mods? Thats if he wants to have Vic registration?

You still have to drive around with the mods on though, so a major defect results in having to pull it all off again, let alone the EPA.

With the level of modification on the car this would also be a costly/time consuming process.

haha cool :kiss: I will let you know when I arrive and we can go over the safe areas :)

what is the problem with driving at night?

It will mostly be a weekender only, and it sounds like tht is the way to keep it :)

You will be more likely to get pulled over at night. How often do you see cars being pulled over in the rush hour/during the business day vs at night (it does happen but compared to people being pulled over at night is much lower). Most of the pulled over posts I have seen have been from the evening.

Anyway good luck with the move and as a weekender, I would have thought you will be fairly safe anyway. :kiss:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
    • I also got the same floor mats for a bit of extra bazzaz haha
    • Some more close up pics now that I’m back to working on the car, the loop pile is nice but again haven’t compared it to the other types in person, it’s hard to tell from the pics on the website. View of the hemming on the edges too, it comes in 2 pieces - front and back, honestly very happy with it for anyone on the fence.  Also attached my previous pics from further up as it didn’t let me post them directly before. (Nothing worse than photo bucket pics that aren’t hosted anymore years later)
×
×
  • Create New...