Jump to content
SAU Community

R33 - How-to Fix The Auto Power Window Relay

Lazy-Bastard

By Lazy-Bastard,
in Tutorials / DIY / FAQ

 Share

Recommended Posts

  • 1 year later...
  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

jim80
jim80

I dont even have a relay :?

TALBO
TALBO

No one had this issue on a 95 or later model 33?

Keeffy
Keeffy

Hey guys wonder if you can help me, having similar problems with my s2 R33 gtst Drivers window hsa been starting to play up over a few months, never has any problems going down, can stop at any point

Posted Images

R33S2 Grand Master

R33S2

Posted
Posted

I have been through 3 switches now.

In each one it was the black plastic toggle switch cracking where the white plastic slides in and out on a spring,

I managed to figure out that the spring is too long, and so makes the housing crack. I cut 3 coils off and it still works like normal but easier and still hasn't cracked.

  • 8 months later...
J65 Newbie

J65

Posted
Posted

Both my relay and motor are dead now (pretty sure). Anyone able to tell me how to raise the window? pretty sure i need to disconnect the window from the motor and then lift it right?
Any help is appreciated! :)

  • 2 months later...
  • 2 years later...
  • 2 months later...
tzen Newbie

tzen

Posted
Posted

my window power relay does make a clicking sound, but windows does not go up or down , so I opened up the relay(not the switch), and noticed one soldering point is not so good, fixed it, plug back in, guess what, all worked. so here you go, relay making a click sound does not always means relay is in good working order.

  • 4 months later...
JDMgirl90 Contributor

JDMgirl90

Posted
Posted

Champion! This is great. Not only did I fix my window, I also found out what the rattling noise was that has been annoying the shit out of me, which turned out to be 3 pens and $4.30 change inside my door ?

  • 2 months later...
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy 路 Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Duncan
      What brakes on R34 GTT(Europe)

      By Duncan 路 Posted

      Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr 路 Posted

      So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • 04-LOOX
      R34 GTR Vspec Garage Sale - All must go!

      By 04-LOOX 路 Posted

      Hi, is the HKS  Tower Bar still available ? negotiable ? 馃
    • Duncan
      Duncan's V37.......race car?

      By Duncan 路 Posted

      From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
脳
脳
  • Create New...