Jump to content
SAU Community

Recommended Posts

Well i've found one fundamental design flaw which means i WONT be buying the Viper 791... Something Chris and other may have touched on, but not clearly explained. If i was to buy the viper, i would be buying it as a remote start and turbo timer TOY, not an alarm or immobiliser, not for security.

Immobilisers normally have circuits which are Normally Open (NO). This means the immobilisation circuit is open, and car will not start, until the alarm module disarms, and applies power to the circuit. Cut power to the alarm, and the car will not start, because the immobilier needs to power up the relay to close the immobilised circuit.

The viper is a Normally Closed (NC) system, the circuit is normally closed, and the alarm must apply power to break the circuit. ie, cut the one power wire to the alarm, and the immobiliser will not keep the circuit open, meaning the circuit is not immobilised and the car can be started. Not a good immobiliser!

which is why I keep saying its all about the install..

I have a mate of mine (EE) that modded a 791 to do teh exact opposite of what you stated. did it simply becuase he could :D

  • 1 month later...
Hi Chris.

This Mongoose alarm on ebay says it is Aust standard certified. So this should be fine to get installed right? The difference in price is huge!

http://cgi.ebay.com.au/MONGOOSE-M80G-CAR-A...1QQcmdZViewItem

if you want to pay EVERYTIME it breaks - yes. it has NO warranty despite what the seller says. (they are not a dealer and other dealers WILL NOT warrant it.)

if you want to pay EVERYTIME it breaks - yes. it has NO warranty despite what the seller says. (they are not a dealer and other dealers WILL NOT warrant it.)

Because alarms break so often too....

And other dealers will warrant it.. You may not.. but don't speak for every installer/dealer around

Hey Chris i did sum research on the mongoose wedsite n it says got 11 programmable features. what r they ? can we get a module or something make it to auto start ?

Thanks

it does haev them. no module for RS though.

yeah I've got a Viper 791. I've found it to be great. I had my installer put in an extra two immobiliser points, plus a remote kill switch...

I dont know how helpful this will be for insurance purposes, although its bound to slow the pros down for at least another 30 seconds! :happy:

The remote start feature is the best thing about it for me.. The amount of damage I'm saving on the engine is not calculable, but surely good in the long run. That marketing campaign a few years back for an oil company said that a majority of engine damage is done when the engine is cold. Anyway thats just a perk.

If I had my choice again, I'd have a very difficult decision - although I'd probably end up with the M80 for security purposes. People cant say that their Viper alarm is great because their car hasnt been stolen! It's not until you lose your car that you will change your mind! haha

The remote start and auto window winding is awesome, although window winding can be implemented into most alarms i think?

Conclusion:

Buy the Viper for - Remote start, Flashy remote, 2 Way paging (only if its parked in your garage or within a few hundred metres- sif you aint gonna hear the exhaust anyway!!), engine saving ability if you religiously use the remote start to warm your engine

Buy the M80 for - Security - Black Wiring = harder to steal, Insurance approved (check the viper with your insurance company tho), possibly cheaper, easier to find replacement parts

using remote start to warm your engine is the worst possible thing you could do to your motor, and is causing more engine wear. yes most engine wear is caused when the engine is cold, starting your car when old, then letting it idle for an extended period and SLOWLY warm up just prolongs the amount of time the engine is operating at less than optimum temp. you should be hopping in the car, starting it, let it set for 10 seconds to ensure the oil temp is up, then drive out and heat the engine by driving it.

as for the viper being good, listen to what the car security pro's keep saying over and over. they have wanky features, but zero substance. I'd much rather have my car unstolen then have a massive fancy remote and useless features.

the previous owner installed a viper alarm. but i have no idea what it is. can anybody tell me how the hell i can find out? i've checked the engine bay and i can't seem to find where the module is.

if somebody could pm me with the possible location of the module(for security purposes obviously) that would great.

EDIT: fortunateley the owner before that(the first owner) fitted a 3-point vdo immobiliser which i am thinking of reconnecting in place of the viper. i just did a few tests. i prefer the vdo.

the previous owner installed a viper alarm. but i have no idea what it is. can anybody tell me how the hell i can find out? i've checked the engine bay and i can't seem to find where the module is.

if somebody could pm me with the possible location of the module(for security purposes obviously) that would great

most likely under drivers side dash

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...