Jump to content
SAU Community

Where To Get My Diff Installed

Nic19
 Share

Recommended Posts

Cubes Grand Master

Cubes

Posted
Posted

DIY is easy if you have bought a complete pumpkin.

If its the center; I've enquired and every one I've called so far want around $300-$800 as they 'have' to replace bearings and said they won't do it otherwise. Load of crap.. To simply throw on a crown wheel and possibly adjust clearances.. Std bearings are fine.

salad Veteran

salad

Posted
Posted (edited)

I got my diff centre installed for $80 :)

It was the Kaaz 1.5 way that some people are doing for $1050 delivered. Comes with carrier bearings etc, so they just have to setup the lash and preload.

They did want $550 if I just dropped the car off to them though, so took diff out myself.

That was the cheapest price I could get though, but it was through a very well established comapny (Diff and Trans SA, been around since 1967). Other places were after 200+ just to put the centre in.

Shop around

Edited by salad
salad Veteran

salad

Posted
Posted

The Kaaz ones come with everything. Guy said it was damn easy to fit.

Keep shopping around >_<

And if you can, take the diff out yourself, it's not hard, get a mate to help you though, its quite heavy...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      Stagea 260RS seats

      By ARB26 · Posted

      Hey Nismo, any chance in the world you still have these seats?
    • Lithium
      Forced Performance Hta Turbos

      By Lithium · Posted

      I'd say closer to OG GTX3582R, just smaller trim - so 59mm inducer/82mm exducer as opposed to 62/82 for the first gen GTX3582R. Yeah EFRs were boss, the EFR8474 is still an absolute beast and it perplexes me that people still go to things like Turbosmart/Garrett etc when the results people are getting with those are pretty unremarkable compared to what you could get with a turbo available well before those options came out.  DriftSquid (I think) "upgraded" from an EFR9174 to a Turbosmart turbo and promised a comparison video - and kinda shuffled awkwardly and did a bit of diversion from the fact that they didn't get any improvement going to the currently massively hyped brand of turbo from a turbo that was a bit of a frankenstein that had been well superceded in it's own range before the Turbosmart unit he put on there even came out. I suspect the EFR would outperform most Xonas for what a lot of less-insane RB owners would go for, in the 400-600kw range but the Xonas are looking hard to beat up to maybe in the mid 700kw range at this stage- basically where EFRs don't really reach, and before the Precision turbos take over.  What the Xonas do well in the "EFR range" is be easier to package etc, and work very well if a divided housing doesn't suit your application.  
    • WMDC35
      Tomei gasket

      By WMDC35 · Posted

      Are you sure the gasket is blown? What are the issues? Thermocure is the only flush I've seen do anything with rust, very impressed with that, Prestone, rust will be by the pool having a cigarette.  
    • MBS206
      Tomei gasket

      By MBS206 · Posted

      And since the flush you have a blown head gasket? Have you lifted the head off yet?
    • GTSBoy
      Hr34 fuel pump not turning on

      By GTSBoy · Posted

      The answer is to get a hold of the wiring diagram, work out what voltage is supposed to be where, when, and then work out why it is not there, then. I can't speak to the HR34 stuff, because I have never paid any attention to the NAs. There is a possibility that the turbo diagram will help, but it could also be different - depending on whether there is an FPCM on the NAs.
×
×
  • Create New...