Jump to content
SAU Community

Recommended Posts

Hey all, i know this isnt the 4 sale section but im in desperate need to unload some parts after my stack

I have NEARLY everything needed to turn your automatic into a manual.

clutch, brake and accelerator pedals and pedal boxes

Hand brake lever and line with dori button

center console to go over the different hand brake

and manual tailshaft.

some one should definatly want this if there serious about drifting.

atm its collecting rust :wave:

0418 822 646

asking $400

Edited by KICKIN
Link to comment
https://www.sau.com.au/forums/topic/144102-turn-your-auto-into-a-manual/
Share on other sites

  • 2 weeks later...
Hey all, i know this isnt the 4 sale section but im in desperate need to unload some parts after my stack

I have NEARLY everything needed to turn your automatic into a manual.

clutch, brake and accelerator pedals and pedal boxes

Hand brake lever and line with dori button

center console to go over the different hand brake

and manual tailshaft.

some one should definatly want this if there serious about drifting.

atm its collecting rust :(

0418 822 646

asking $400

Still for sale? location?

hey mate :P,

check this thread, http://www.skylinesaustralia.com/forums/in...howtopic=146674

u shud b interested r32 parts swap, i need center console to go over the different hand brake, r32 parts worth more den a31 coz it will b easier 4 u 2 sell

u got my numba :P

Edited by Dan_J
  • 2 weeks later...

Hey Dan.

nah not interested in r32, im not going to waste my time with this anymore as i just wana sell all of all the parts ive got and 4get about the whole project.

hehehe

RSO84

how about 400 today?

or ill give it to u for 200 if u sell me ur car for half what its worth today?!

Edited by KICKIN
  • 3 weeks later...

Im about 40 min away on the eastern side, but we could arange to meet or somthing if u like.

what do you u mean hold it for a couple of weeks if you buy it?

how far away from melb cbd are you mate? and are you willing to hold it for a couple of weeks if i buy it?. cheers
Im about 40 min away on the eastern side, but we could arange to meet or somthing if u like.

what do you u mean hold it for a couple of weeks if you buy it?

i mean, i pay then pick it up in a couple weeks, im from interstate but i end up in melb a bit :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...