Jump to content
SAU Community

Recommended Posts

1994 Nissan Skyline R32 GTR manual 5sp

Recently full resprayed in White without wing (boot holes professionally shaved off), car looks hot, sits on 18inch deep dish wheels, 3" straight thru exhaust, HID headlights

Asking Price: $15 000 ONO

Killometer's: rebuilt 5000kms ago, bottom end knock

Complianced: Yes

Registration: 11 months rego

Crash History: No Accident History - Inspection Welcome

Other Comment's about the vehicle: Purchased this car from friend who did a rebuilt, spent 12gs on the motor. Since ownership, I did a full respray in white that costed 5gs.brought a set of 18 inch deep dishes. Fitted a Apexi Power Fc w/ hand controller, front camber kit, new blitz 850cc injectors, greddy profec B spec2 boost controller. Driven the car for about 2000kms and started hearing a bottom end knock, unsure what the problem is. Dont have the funds to continue with project. Serious buyers only.

Sydney buyers only unless your willing to come down yourself and look at it personally.

No pictures and there wont be!!

Contact detail's Sam 0423 069 456 , or PM (prefered you called if you are serious)

Edited by defect
Link to comment
https://www.sau.com.au/forums/topic/144640-syd-1994-r32-gtr/
Share on other sites

Whats the catch?

Rebuilt.. Resprayed.. Power FC, Rims..

$15k is way too cheap IMO but hey if its legit then im pissed off cos i need to sell my car to get this.

White 94GTR is EXACTLY what i wanna upgrade to =(

Edited by MADGT4
Whats the catch?

Rebuilt.. Resprayed.. Power FC, Rims..

$15k is way too cheap IMO but hey if its legit then im pissed off cos i need to sell my car to get this.

White 94GTR is EXACTLY what i wanna upgrade to =(

Driven the car for about 2000kms and started hearing a bottom end knock

howcome no pics? just blank out the numberplate?

who complied it?

reciepts for motor?

who built the motor?

what clutch has it got?

all are valid questions. pm me if you dont want anyone to see it for whatever reason.

no receipts for work, no pics because im looking for a quick sale

if your interested, call the number. possible spun bearing

not interested in interstate buyers. Sydney only!

if you want a quick sale put up some pics...generate a bit of interest....instead of putting people off with comments like "No pictures and there won't be"

it makes you sound like a real wanker and makes people suss on the car and the deal.

If i post pics, im gonna be sitting here answering PM's all day

I dont have the time to post pictures and sit here answering all the PMs

I can say 100% this is a genuine sale, you wont find another deal like this. 94 model (latest of the r32 gtrs), clean paintjob, ecu, injectors. The car owns me close to 37k. I dont care what anyone actually says because Im getting callers everyday and there are people coming to look at it so it dont bother me but thanks for your advice.

if you want a quick sale put up some pics...generate a bit of interest....instead of putting people off with comments like "No pictures and there won't be"

it makes you sound like a real wanker and makes people suss on the car and the deal.

Good call

:)

Enough chat guys, if you arent genuinly interested in purchasing this car, do not post.

If people cant control themselves and continue to post their 2 cents, warnings will follow.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...