Jump to content
SAU Community

R33gtst/gtr Hks Super Drager

ChrisR33GTS-T
 Share

Recommended Posts

ChrisR33GTS-T Enthusiast

ChrisR33GTS-T

Posted
Posted (edited)

HKS Super Drager cat back system

Original HKS drager for a R33GTST or GTR as they share the same part number from the HKS catalogue.

In good condition, purchased second hand from SAU forums but never installed on my car. Unit has some scratches underneath main muffler.

$ 450.00

Trust Blow Off Valve Type-R

In good condition, purchased from SAU forums, ran it in my car while I was running high boost pressures (15psi+).

$ 200.00 SOLD

Defi BF Gauges and unique Border R33 GTST/GTR Shroud

In near new condition Defi BF Turbo, Water Temp and Exhaust Temp 60mm Gauges. Used for no more than 2000km. Includes individual gauge holders but does not include loom or sensors and the control unit as they are still installed on my car. These can be ordered as spare parts through any Defi dealer.

Very rare gauge cluster is made by a Japanese company "Border" basically brand new. This is for all model R33GTS/GTR, it looks part of the dash as it sits on the passenger side pointing towards the driver. Very Cool!

$ 450.00 Gauges are no longer for sale! Cluster is still available $100 SOLD

Located in Melbourne.

Please contact me via PM.

Edited by ChrisR33GTS-T
Link to comment
https://www.sau.com.au/forums/topic/144853-r33gtstgtr-hks-super-drager/
Share on other sites
ChrisR33GTS-T Enthusiast

ChrisR33GTS-T

Posted
  • Author
Posted
waht does the bov sound like...a whoosh or a flutter?

The BOV really only operates at high boost pressures even on the softest setting, so normally when you change gear early you'll get a bit of a flutter or a full woosh once the turbo hits full boost.

ChrisR33GTS-T Enthusiast

ChrisR33GTS-T

Posted
  • Author
Posted
did the previous owner say if the exhaust was loud or quiet?

I heard the exhaust on the prev owners car before I baught it and it had a nice gurgling rumble. Even tho its basically a 4inch exhaust it has three mufflers so its never going to be loud.

ChrisR33GTS-T Enthusiast

ChrisR33GTS-T

Posted
  • Author
Posted

thanks for the feedback Moonus... HKS of course don't make these exhaust systems anymore so they are becoming a sort after item.. It took me ages to find this one and that was over 12 months ago!!

leech_ Grand Master

leech_

Posted
Posted

i have HKS super dragger on mine with BAMBTL's dump and high flow cat and it sounds very nice at idle it's reasonabley quite but as you really start to open it up it comes to life (While still not being to loud) i have had a heap of people comment on the how good a note it gives off too.

oh yea it flows well too :mad:

ChrisR33GTS-T Enthusiast

ChrisR33GTS-T

Posted
  • Author
Posted

Just letting the VIC guys know I have a few interstate buyers who are keen but VIC guys have first preference due to the inconvenience of shipping the exhaust interstate. I'll give it till 03/12 (End of Day) then i'll ship it interstate.

Regards

Chris.

DivHunter Grand Master

DivHunter

Posted
Posted (edited)

Does the BOV have the strong or standard spring?

Also does it need an adaptor to fit to a standard pipe? If so does it come with it?

Edited by DivHunter
ChrisR33GTS-T Enthusiast

ChrisR33GTS-T

Posted
  • Author
Posted
Does the BOV have the strong or standard spring?

Also does it need an adaptor to fit to a standard pipe? If so does it come with it?

BOV comes with the standard spring. When I baught it i thought it has the stronger spring so i purchased the softer spring from nengun but found that i already had the softer version! This bov is capable of holding 3 bar (with the stronger spring i assume) and is commonly used to replace the two standard GTR bov's, so its meant for cars making big power. If you use it on a stock turbo you will just get a whole lot of flutter.

This BOV does not come with any adaptors for any cars except for GTR. As per www.trust-power.com

ChrisR33GTS-T Enthusiast

ChrisR33GTS-T

Posted
  • Author
Posted

Updated pics with the gauge cluster. Also I'll seperate the cluster as i'm having second thoughts about selling the gauges.

$ 150.00 for the cluster (in near new condition)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...