Push And Pull Clutch, Are Flywheels Same

[Duncan]

An easy question, is the flywheel the same between a push and pull clutch, specifically between 32 and 33 gtr?

I assume so but want to check before I find myself with an un-bolt-up-able mess.

[benm]

Yup need to know this too.

Duncan im good at removing flywheels without touching the bolts if u need my services...

[Duncan]

ahhahaha thanks mate but I don't think I'll try your method!

[Swiper the Fox]

both the same...ive even used atmo push VL flywheels on a pull type GTR set-up before...no problems at all.

[Duncan]

excellent, thanks one less thing on the to-buy list.

[Swiper the Fox]

excellent, thanks one less thing on the to-buy list.

are you going from push to pull or from pull to push?

[Duncan]

BTW I should have worked this out myself, FAST says a 32 GTR flywheel is:

12310-05U11

which has been superseeded by:

12310-05U13

12310-05U14 (33 GTR)

12310-05U16

So yes....all interchangable

[Duncan]

are you going from push to pull or from pull to push?

converting one box from pull to push and the other from push to pull....is a gearbox-a-thon in the garage

[Swiper the Fox]

are you going from push to pull or from pull to push?

reason im asking is im going from pull to push and im looking to swap slave cylinder's, clutch forks, bearing carriers etc...with someone going the other way.

[Swiper the Fox]

converting one box from pull to push and the other from push to pull....is a gearbox-a-thon in the garage

we did this same thing during an event at EC....smashed 3rd between turns 9 and 10 and when the spare box turned up....guess what it was a push type...our box was a pull. So we did the ol' belhousing switcheroo out the back of the pits on top of one of the waste oil drums.....never do that job again without being at a workshop without a hoist. To add to the mayhem the spare box had no reverse!!

[Duncan]

I'll check on the weekend I think we have another pull style plate, fork and pivot thats not being used. Should be all you need - slave cylinder is the same just mounted the other way around.

I need the push style in the race car due to regs and am just going to put a pull type in the stagea since I have all the bits already.

[Swiper the Fox]

I'll check on the weekend I think we have another pull style plate, fork and pivot thats not being used. Should be all you need - slave cylinder is the same just mounted the other way around.

I need the push style in the race car due to regs and am just going to put a pull type in the stagea since I have all the bits already.

im going from pull to push so ill need pivot ball, clutch fork and bearing carrier. Thanks

[N1GTR]

Duncan do you have to run the standard clutch?

or can you use something more suited to the intended driving style?

[Duncan]

Yeah unfortunately it has to be standard clutch fly etc just allowed to change the clutch material

[T04GTR]

yep. the push flywheels and the pull flywheels are pretty much the same. just get it machined beforehand. the dowls all line up.

[T04GTR]

oh. if you want a 250mm push clutch.. (insttead of pull) use a z32 tt clutch cover.

but dont quote me on it.