Jump to content
SAU Community

Recommended Posts

Hi all,

In the very near future I plan to purchase a set of 17" rims and tyres for my 1993 R33 GTS4.

Before I get my heart set on a certain set of rims, does anyone know what the correct offset is for my vehicle?

Currently it has 4 Stud 205/60/R15 (i think)

Thanks in advance!

chicane

:burnout: ;)

eeek 35profile tyres on 17's! i'd never go that low unless i had 18's +

Thats kool chicane, thought the were 5 something or other

no idea bout the offset of non turbo Skyline's, i'd imagine they'd be quite normal as there 4stud not 5, most multi fit wheels should go on, not to sure tho..

Just spoke to a guy @ donnellans, I think ill go past there on the way home today..

He said that the 5 Zigen's are pretty pricey as they are a fully imported jap rim.. but said there are quite a few other makes which are a bit cheaper with that design..

A guy @ one donnellans said its a 35/40 offset

another said its a 42 offset

so yeah

Hrmmmmmmmmmmmm anyone got any definites on this?

Cheers

This is what I found in my owners manual.

the offset depends on the width of the rim, any good tyre place will be able to tell you if the rim will fit properly as well as if the rim will handle the weight of the car... most 4 stud are only rated for small cars like pulsars and have max load of about 500kg so are not usable.

I ended up with 16x7 offset 40, tyres 225/50 92V (Toyo TPG) these also made my speedo more accurate..

Hi all,

After going around to a few tyre/mag places today, seems some places don't seem to care too much about offset..

In regards to maintaining the correct offset for my vehicle, with the 15x6" rims on there at the moment (they have an offset of 40mm), if I increase the width by 1" to 17x7" is this new offset calculation correct?

Increase of 1" width = 25.4mm

25.4mm / 2 = 12.7mm

40mm + 12.7mm = new offset of 52.7mm required?

Seems a lot of mags i like come with 40mm offset.. Is this OK to use?

Thanks in advance

chicane

:burnout:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...