Jump to content
SAU Community

Recommended Posts

I have a set of headlights from a 2001 R34 GTR V-spec II these have been changed to halogen when the car came through compliance looking for around $850 will post up pics soon PIC'S ADDED lights have been sold

Edited by gtr13
Link to comment
https://www.sau.com.au/forums/topic/146084-r34-gtr-headlights-sold/
Share on other sites

You can't answer a question then stick a '?' on the end!!! lol

Ring Nissan, get the part numbers...for GT-t and GTR easy!

Either way the bolt locations look the bloody same to a GT-t to me.

nop

Here we go again , I don't want to get into an argument with you dude ( just been there and done that ). The head light itself is exacly the same as long as it is Xenon ( some low soec 34's had halogens). The brackets are the same , they bolt on , etc... i have fitted GTT lights on a GTR . there is a little difference however but not on the light itself . Halogen h/lights will fit on a GTR as well but the parker is different, the h/l assembly is the same .

I won't go in to the trouble to post up pics to show you the difference because i'm sure i'll get some expert to say something stupid like in this thread here, so blaim these experts here for it . As you can see there i went to a lot of trouble and then i get called names .. http://www.skylinesaustralia.com/forums/in...46296&st=20

By the way the h/lights for sale are from a GTR not GTT... Actually its easier to fit GTT h/lights to GTR than the other way around.

Yes GTT lights are the same as GTR. There is a difference as wrxhoon has mentioned but it is only in the rubber strip which runs across the top. The GTT has a longer rubber piece.

I should know - I pulled my GTR lights out (which had been converted to halogen during compliance) and put a set of GTT lights with the xenon bulbs plus ballasts still attached straight in. no difference...

Yes GTT lights are the same as GTR. There is a difference as wrxhoon has mentioned but it is only in the rubber strip which runs across the top. The GTT has a longer rubber piece.

I should know - I pulled my GTR lights out (which had been converted to halogen during compliance) and put a set of GTT lights with the xenon bulbs plus ballasts still attached straight in. no difference...

I'm sure some "expert " will still say they are different..... probably come with "they are different part number so they must be different".

wrxhoon i agree with everything you've said so far mate but y do u have to be so sarcastic and smartass no one is doubting u on this post so take it easy man lol its sounds like u definately know ur shit and i aint arguing with no one but take a chill pill lol ...

Edited by --{TRYDIS}--
wrxhoon i agree with everything you've said so far mate but y do u have to be so sarcastic and smartass no one is doubting u on this post so take it easy man lol its sounds like u definately know ur shit and i aint arguing with no one but take a chill pill lol ...

If posting facts is considered a "smartass" by you, well then i'm guilty dude. If it wasn't for the smartasses in the other thread you would have pics to compare the 2 h/lights in this very post.

Sewid has pointed it out very well...

As for taking a "chill pill", I don't think that i will need one today, its bloody cold here lol....

lol come on mate im not tryin to pick a fight but srsly dont blame every1 for some ppls shit i get that alot man im lebo u dont understand how judged i get for other dickheads f*k ups. dont be like that man

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...