Jump to content
SAU Community

New Clutch Or Rebuild Old One?

Burgerman
 Share

Recommended Posts

Burgerman Enthusiast

Burgerman

Posted
Posted

Hi Guys,

I have looked over the threads here and there is a good deal of information regarding what clutches people have etc. I've had my R32GTR for almost 3 months and after going uphill in 4th gear realised my clutch is slipping. I have a twin plate OSGiken clutch. I've gotten some quotes from a mechanic:

Rebuild: which includes rebuilding the current twin plate OSGiken clutch and machining the flywheel = $approx $1300 including labour.

New single plate clutches, different types they told me, one was a brass button one, the other was an organic single plate one, the brass button one was $100 dearer but with labour came to about the same price as the rebuild because I would most likely need a new flywheel with the new clutch.

I would like to keep the twin plate if it means better gripping and gear changing down the line when I hopefully conjure up some money and get some mods done to increase the hp. My engine is pretty stock except for 2 airpods. However I was also thinking whether or not a rebuild and remachining would be as long lasting as a new single clutch, if the single can handle approximately 350kw (which is about as far as my money in the future will probably take me) it might be the better option now if it would last longer.

Currently I'm leaning more towards the rebuild, mainly cause I get to keep the twin (as a new twin would cost more than the rebuilt one) and it works out to be the same if not cheaper than the single options. Just not sure if it would last as long as a new clutch would.

I'm not a huge car racer or dragger if that helps. Just want something decent. Willing to pay the money mind I don't want something for nothing, I just want something that's worth it and both options seem to have their good points.

Any input would be helpful to make up my mind.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/146250-new-clutch-or-rebuild-old-one/
Share on other sites
T04GTR Grand Master

T04GTR

Posted
Posted

dont get a single. it will shuddder and eat your flywheel.

jim bery in qld rebuilds the os ones for i think around 1100.

rated to heaps. the rebild kit from os giken as roughly a grand.

yuo need to find out what sort of twin plate it is.

steel cover or alloy,205 or 215mm plates.

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
dont get a single. it will shuddder and eat your flywheel.

jim bery in qld rebuilds the os ones for i think around 1100.

rated to heaps. the rebild kit from os giken as roughly a grand.

yuo need to find out what sort of twin plate it is.

steel cover or alloy,205 or 215mm plates.

yes and no

send the twin to Jim to be rebuilt or get him to build you one of his "full monty" singles good for 500awkw+ they bite hard and never "shudder" we raced one for two years and it was possibly the best thing i ever have bought for any of my cars.

draaahh Explorer

draaahh

Posted
Posted
Hi Guys,

I have looked over the threads here and there is a good deal of information regarding what clutches people have etc. I've had my R32GTR for almost 3 months and after going uphill in 4th gear realised my clutch is slipping. I have a twin plate OSGiken clutch. I've gotten some quotes from a mechanic:

Rebuild: which includes rebuilding the current twin plate OSGiken clutch and machining the flywheel = $approx $1300 including labour.

New single plate clutches, different types they told me, one was a brass button one, the other was an organic single plate one, the brass button one was $100 dearer but with labour came to about the same price as the rebuild because I would most likely need a new flywheel with the new clutch.

I would like to keep the twin plate if it means better gripping and gear changing down the line when I hopefully conjure up some money and get some mods done to increase the hp. My engine is pretty stock except for 2 airpods. However I was also thinking whether or not a rebuild and remachining would be as long lasting as a new single clutch, if the single can handle approximately 350kw (which is about as far as my money in the future will probably take me) it might be the better option now if it would last longer.

Currently I'm leaning more towards the rebuild, mainly cause I get to keep the twin (as a new twin would cost more than the rebuilt one) and it works out to be the same if not cheaper than the single options. Just not sure if it would last as long as a new clutch would.

I'm not a huge car racer or dragger if that helps. Just want something decent. Willing to pay the money mind I don't want something for nothing, I just want something that's worth it and both options seem to have their good points.

Any input would be helpful to make up my mind.

Cheers

If you have a credit card, im not sure whether it was Nengun.com or Greenline.jp, but one of them had OS rebuild kits for sale, and from experience you can get these parts a lot cheaper from these sites.

PT Community Regular

PT

Posted
Posted

I am in same position, my TR2CD OS Giken twin has slipped badly, the alloy cover plate is fine though, I will be ordering my OS rebuild "kit A" off greenline within the week (last quote was ~$850 delivered) then just add machine costs and R&R

Kit A=x2 clutch discs, pressure plate and the middle plate

Kit B= as above plus new cover plate too (was ~$1100)

You will need to know what model you have or workout before ordering

http://www.otomoto.com.au/osgiken/index.htm

  • 2 weeks later...
PT Community Regular

PT

Posted
Posted

just an update ordered OS Giken Kit A from greenline.jp, paid on the 12/12/06, payment cleared the next day, clutch kit arrived from Japan today 20/12/06!

Very impressed, 8 day turn around, just over $800 delivered, now to machine flywheel and deck the mating surface for clutch cover (retain same clucth clearances)

Burgerman Enthusiast

Burgerman

Posted
  • Author
Posted

I ended up getting my osgiken twin clutch rebuilt and the flywheel machined for a total of $1300 including labour. It feels alot better and gear changes now are a breeze. No slipping in any of the gears so yeah I'm pretty happy with it for now, just hope it lasts me awhile.

  • 2 weeks later...
gun32gtr Grand Master

gun32gtr

Posted
Posted

i just bought a os twin from these forums and its on its way but im gunna see how long it lasts in 300 odd kw... then rebiuld it when it needs,just started running out of cash so have to wait...

Preacher Newbie

Preacher

Posted
Posted

Ey there my Skyline brothers.

Doing a bit of googling around and found this thread. I'm having probs with my OSg triple plater slipping on my Sup. Been digging round looking for anyone who rebuilds plates in QLD.

Mind telling me how I could get in contact with this 'Jim Bery'? If you think he'd rebuild a triple...

Cheers guys.

  • 4 months later...
Burgerman Enthusiast

Burgerman

Posted
  • Author
Posted

sorry to bring up an old thread but I ended up getting the clutch rebuilt and it feels pretty good. Only drama or issue I have is that in 1st gear and reverse at low revs it will shudder. If I rev it to 3 grand or more and slowly release it and move off slowly it's fine. But quite often at slow speeds and low revs it will shudder quite a bit. High speeds and high revs it's great though ?

FATGTS-R Experienced

FATGTS-R

Posted
Posted

I have a recently rebuilt os twin as well and it can shudder sometimes. You end up finding a sweet spot that lets you get away cleanly (sometimes) in stop start low speed stuff.

What you say about revving to 3 grand or more and slowly releasing i.e riding it will kill your newly built clutch very quickly.

Before my rebuild it was fine with zero slipping and then my gearbox locked up in fourth. I had to ride it really bad to get my car home a hundred metres away. When the box came off the clutch was cactus. Twin plates are not fond of being slipped.

Burgerman Enthusiast

Burgerman

Posted
  • Author
Posted

yeah it's a tempremental thing. I don't make a habit of riding the clutch up hills in traffic for instance but sometimes if I"m just moving off slowly it's hard to avoid the shudder unless I rev it a bit perhaps 3 grand. AFter awhile I get tired of launching too quickly but in general traffic it's fine. I think the main problem is in car parks for instance, like you said finding that sweet spot it doesn't shudder but then other times it will. Other than that I'm quite happy with it. ::)

justinfox Mentor

justinfox

Posted
Posted

Guys I have an OS Giken twin plate too. I find it takes up really damn late which makes it an absolute pain to drive, especially on hill starts. I was just wondering if this is normal? And/or if other clutches out there take up a lot earlier? Or if this take up point can be adjusted at all?

It literally takes up just before you let go of the clutch pedal, right at the end then BAM it catches.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
    • Kinkstaah
      Unpeeling the Orange

      By Kinkstaah · Posted

      Continental have consistently beaten the absolute shit out of every other performance tyre in Wet/Damp/Cold conditions and give up a little bit of time (half a second at most) in the dry. Almost like it's engineered for German conditions or something. I'd def give those a try.
×
×
  • Create New...