Jump to content
SAU Community

Recommended Posts

Has any one fitted white faced gauges to there car before? I have a R33 series 2 and on ebay you can pick up white faced gauges for $75 plus shipping. But the thing is how hard are they to fit? Is it something i can do myself? and has anyone done it before? also are the legal to have? (cos everything these days is illegal!)

Thanks

Link to comment
https://www.sau.com.au/forums/topic/146327-white-faced-gauges/
Share on other sites

Has any one fitted white faced gauges to there car before? I have a R33 series 2 and on ebay you can pick up white faced gauges for $75 plus shipping. But the thing is how hard are they to fit? Is it something i can do myself? and has anyone done it before? also are the legal to have? (cos everything these days is illegal!)

Thanks

Adz,

I personally have white faced guages installed in my Series Two. To install:

1. Remove dash surround and remove dash cluster.

2. Unclip the front clear panel and expose the black bezel.

3. Remove bezel to expose guages.

4. The guage faces will have an enlarged center hole to slide over the needles... and sit over existing faces. For boost, you have to remove the tacho by unscrewing it from the back and pulling out from the front. The whole assembly should come out. (NOTE: DO NOT REMOVE NEEDLES)

5. Depending whether your faces are EL, remove all lighting bulbs except for warning lights and the one down the bottom right.

6. Again if EL, feed wires through where the bulbs used to do and hook up to 12 volt source (headlights)

7. Re-assemble and put back in.

8. You now have a sexy new dash.

Any more questions, give me a yell.

Cheers,

-Bman

i am after a set of these for my car but they only make them for GTS-T's =[

i COULD put the GTS-T ones in my car, but that is major wank factor concidering it will have the turbo gauge there... and no needle...

if anyone comes accross any for a GTS please pm me.

kthx

josh

ive got the white face for the dash cluster. but with mine its just all white and glows blue or green. it was a pain to put in because i had to take the needles off and it is a bitch to get them back on, spot on the right spot (adv to have a digital speedo and tacho).

but the rest was easy. just a mater of taking it apart, sticking them on, hooking up the wires, placing the dimer and back together again.

what will they fit in??

And also, these NISMO white faced gauges are 320kph and 11 grand tacho, as opposed to the stock 180kph and 9 grand tacho. Do you have to change cogs/gears at the back or somethin??

Sorry if this has been covered before, just wondering

Bman how much were your ones, and where did you get them ?

Alex_r33: They were about $90.00 + Postage

Josh: Im sure they do make them for the GTS's aswell, I got mine off ebay, have a look on there and try searching for EL GUAGES or similar and you should have some luck.

xtra.5: I didn't see the nismo guages until after I purchased these.... Should have waited a little while longer. :miner:

Cheers

  • 3 weeks later...

What if u just bought the whole instrument cluster? Would that re-calibrate it......i was thinking this, before when tossing up between the 320 vs 180 white faced dials. got the 180 cause seriously how often do u go above that. and on the drag strip u get told how fast u were going anyway! Plus personally i think they look better with just the middle lighting up and being able to jump between blue and green just by pressing a button.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...