Jump to content
SAU Community

Twin Hks 2530's + Power Fc

Snowman
 Share

Recommended Posts

Snowman Grand Master

Snowman

Posted
Posted

Guys,

I've gone in a new direction with my car so I have my HKS 2530's with actuators (done about 10,000kms - still perfect) and my Power FC with the hand controller for sale.

Won't seperate the turbo's or the Hand Controller from the Power FC.

Turbo's - $2,700

Power FC + HC - SOLD

Contact me via PM or on 0419 375 140.

Cheers

Snowy.

post-5136-1166391454.jpg

Link to comment
https://www.sau.com.au/forums/topic/146351-twin-hks-2530s-power-fc/
Share on other sites
Snowman Grand Master

Snowman

Posted
  • Author
Posted

The last tune done on my car with the power fc was 362rwkw's @ 24psi that was also with the 2530's, cams and a bottom end (pistons only).

Before I did the bottom end I was making 325rwkw's @ 19psi with the power fc, cam gears and 2530's.

GTRgeoff Grand Master

GTRgeoff

Posted
Posted

So do you want your stock turbos back for the "new direction" mate?

Discovered it wasn't them at all but a machine shop not fitting the pistons to spec so the rings failed. Plus I have other turbos to use now.

Anyway I hope the sale goes off before Xmas so you can buy new goodies.

Snowman Grand Master

Snowman

Posted
  • Author
Posted

Hey Geoff,

Na I'm going the N1's route so I can make the car Targa Spec. It's going to suck at first as I know I'm going to miss the top end pull of the 2530's but the rules are rules and there is nothing much I can do about it if I want to start competing in some of these big events.

GTRgeoff Grand Master

GTRgeoff

Posted
Posted

Targa it is then. Excellent. What about the Garrett GTSS spec turbos? Look the same as stock and 320awkw. Not called Targa cheaters for nothing.....

Snowman Grand Master

Snowman

Posted
  • Author
Posted

Everything is now back on the market as the previous buyers have had to pull out.

I've attached a copy of my last dyno graph taken in March this year when I had both the power fc and 2530's in the car. This should clear up any questions on power and response of these turbos.

  • 3 weeks later...
  • 5 weeks later...
  • 3 weeks later...
  • 3 weeks later...
R32 GT-R Collaborator

R32 GT-R

Posted
Posted
R32 GTR the rules are M2 spec in the cams tarmac rally regs. Think 99% dead standard. http://www.cams.com.au/downloads/articles/...ions%202006.pdf

that link is for pre 1982 vehicles, thanks all the same. I'll dig around the cams site to see if i can find the after 1982 one lol

  • 4 weeks later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...