Jump to content
SAU Community

Recommended Posts

So its 'that' time of the month for you is it...

There is no rule stating that a VIP car has to be a sedan... i dont think Hummers are sedans and there are plenty of them done this way...

I have seen plenty of VIP wagons just no stageas.

if you are against people being different, why dont you go buy some fully sick N/a 6cyl VS Commonwhore, dump it on some fully sick 16's and add 3 inch exhaust (dont forget the chrome tip :action-smiley-069:)

Oh, and the bundy sticker.

maybe there are plenty of blinged out hummers over in the us,but they're not VIP cars. just like blinging up a stagea won't qualify. you could put carbon fibre bits all over it and throw in a roll cage,but it wouldn't be a race car then either... it's a wagon,that's all it'll ever be. I own one too remember,and don't feel any need to make it what it's not,although it is far from standard,it's not pretending to be anything other than a daily driver with a bit of go.

as for the 'time of the month' bit,you'll have to try far harder than that to upset me mate. I call a spade a spade. a stagea is NOT a VIP car. it doesn't matter what you do to it,it never will be. I'm not against people being different, I don't give a toss what you do to your car,you're the one driving it,not me. I won't agree with your calling it something it's not though. delude yourself all you like,but don't expect me to smile and nod.

Justin...

maybe there are plenty of blinged out hummers over in the us,but they're not VIP cars. just like blinging up a stagea won't qualify. you could put carbon fibre bits all over it and throw in a roll cage,but it wouldn't be a race car then either... it's a wagon,that's all it'll ever be. I own one too remember,and don't feel any need to make it what it's not,although it is far from standard,it's not pretending to be anything other than a daily driver with a bit of go.

as for the 'time of the month' bit,you'll have to try far harder than that to upset me mate. I call a spade a spade. a stagea is NOT a VIP car. it doesn't matter what you do to it,it never will be. I'm not against people being different, I don't give a toss what you do to your car,you're the one driving it,not me. I won't agree with your calling it something it's not though. delude yourself all you like,but don't expect me to smile and nod.

Justin...

ok so lets just completely diss the guys idea of trying to do something different and to his own taste? Who's call is it to say what is and isnt a VIP car? Most people who buy a stagea do so because they see potential in something different, they see something others dont, and go for it, and some of us go out of our way and pockets to make it our own. Normally someone with the common sense to see what a stagea is, and BUY one, has the common sense to shut their mouth (or still their fingers) when there comments are neither warranted, or needed. xo

Oh and Felix the bar was originally a Nismo bar, but has been modded, cut and fibreglassed to nearly beyond recognition. Chris (AMS on these forums) can get u my full bodtkit, through monkey warehouse. As has been said, not a great deal available in aus for the stagea, so i got the nismo kit and did a custom job. Thanks for the interest!

And as everyone else on here says - good luck with the build, hope it turns out how u want, and i look forward to seeing the finished product!! Ive seen a couple of nice VIP wagons - a Black BMW and a white Mercedes, both done very subtle but effective.

Rob

Edited by qikstagea
I reckon it'd look tops mate... a set of this style wheel would look schmicko

http://www.work-wheels.co.jp/wheels/index/eudhp/spec-1.html

Those wheels are alright, but too common for my liking - even if you rarely would see/have ever seen them on a Stagea. But that's just my opinion... I prefer the subtle street sleeper - nice wheels, lowered suspension, and a few detail items here and there to set the car off, but not draw too much attention except from other enthusiasts.

As far as wagons being VIP's, there was a black Toyota Crown posted ages ago done by Junction Produce, who mainly focus on VIP-style cars anyway... Looks very similar to an s1 Stagea, so I think the results will be to your liking. I actually quite like it myself! :(

gw4DSCN0021021.jpg

hey yeah... didnt think of that myself (was me who spotted it as a crown lol) but yeah its definately a car to draw cards from. JP put out some NOICE cars (pity theyre all dark royal green). nice place to start.

hey yeah... didnt think of that myself (was me who spotted it as a crown lol) but yeah its definately a car to draw cards from. JP put out some NOICE cars (pity theyre all dark royal green). nice place to start.

Hey, what's wrong with dark green? :D:D:dry:

hahahhaa yeah there not cheap but there the real deal in BLING, i can arrange some better prices but there never gonna be a cheap rim.

If u really wanna go extreme can do specail orders for jewel encrusted wheels too ...not fake jewels but real emeralds,saphires, rubys, diamonds etc covering bout 60% of the wheels (some expensive kurb rash) and diamond encrusted wheel nuts

Theres a video clip by lil romeo i think called dubz check it out to get the idea,

... you can also design your own rims,

anyways jus to give you guys some ideas and if you need anything jus gimme a shout

Lee ;)

Edited by STAGE-A

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...