Jump to content
SAU Community

Recommended Posts

new plates... I boost

Dont worry eyelids getting back on soon, along with spoiler coming off again

Good idea...

If only we could use 7 letters, I can think of plenty with 7.

Anyway, I also bought two custom plates back in May:

gallery_46181_2588_6597.jpggallery_46181_2588_41850.jpggallery_46181_2435_2408.jpg

The 'WJ' were originally going onto the R34... but I liked the look of the Targa plates better :D

BTW - last time I checked, 'R34' was still available in Tassie.

I *nearly* ordered them but the Targa plates were half the price - and if I sell the R34, the plates would only suit another R34, so...

clean engine

well, had to take a wheel off today to check if it was leaking or if i drove over a nail cause my pump didn't work.

Didn't sound safe with the jack below it and i didn't want to take it any higher and place a stand below it so grabbed out a 18" SSR rim with 285 x 30 x 18 on it :D

There is a spacer in there.

I dont like the white on chrome.

Thoughts?

th_DSC06562.jpg

th_DSC06568.jpg

th_DSC06567.jpg

Edited by Owgasm
clean engine

well, had to take a wheel off today to check if it was leaking or if i drove over a nail cause my pump didn't work.

Didn't sound safe with the jack below it and i didn't want to take it any higher and place a stand below it so grabbed out a 18" SSR rim with 285 x 30 x 18 on it :whistling:

There is a spacer in there.

I dont like the white on chrome.

Thoughts?

th_DSC06562.jpg

th_DSC06568.jpg

th_DSC06567.jpg

your R34 looks...wierd? should paint the bottom lip or something and clear front indicators. cause looks like the front is higher then the rest of the car.

id stick with the old rims, black chrome lip, and maybe some c/f ganador mirrors

Yeah, its a 33 :thumbsup:

But possibly cause its on a hill, so the rear is experiencing my force downards.

The front looks odd cause theres no lower lip, i reckon any GT-R 34 requires the lower lip/diffuser, else it looks funny.

I've been looking for years, believe me i've noticed.

But i wouldn't paint it anyways :P

I prefer the black and chrome lip. These others wouldn't fit anyways, the rears are 335's.

Edited by Owgasm
and bakes, I LOVE your garage, so clean and simple :thumbsup: very jealous

Thanks buddy. I painted it just before I picked up the GTR. My missus laughed at me when I said I was going to paint the garage red (was a dirty white color before) but it came up sweet!

Hi Bryn, it's just the flash.

Would be good if the doors had lights instead of reflectors though.

yeah i remember when i got the car in 05, i took them off thinking the bulbs had blown but couldnt find anything :(

when i saw urs i was like :O no way lol

yeah i remember when i got the car in 05, i took them off thinking the bulbs had blown but couldnt find anything :(

when i saw urs i was like :D no way lol

Hehe :D

Yeah, I had much the same idea when I first got my 34 - I thought the bulbs had blown.

Ok, thought i'd post a couple of my pics of my GTT R34 ,, yes it is a GTS-R badge.

Top Secret GTR front bar and Z-Tune Bonnet

Sorry pics not best it was raining at the time.

July11-Skyline34.jpg

.

July11-Skyline34_2.jpg

.

July11-Skyline34_3.jpg

.

thanks for looking, just needs the top secret front diffuser lip

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...