Jump to content
SAU Community

Recommended Posts

ok so this is how my night went down:

started work at 4 (doing 4-12 shifts at the mo'), parked the car up at the London Cct/YMCA carpark (just up from allara house and taxation office) and all is well, i decide to go outside for some fresh air at about 9.50pm and all of a sudden my car alarm starts going off, i look in the direction of my car and theres the car lights flashing (wasnt 100% sure it was my car as i havent heard my car alarm go off too often) and i see a couple of guys run off, so i walk up to my car and my drivers side window is on the ground, its tinted window so it didnt smash, it was just in a cracked heap on the ground. i look up at the bushes at the top and see some guy in the bushes, and as i dont have but have been meaning to get a baseball bat, i yell out, "what the f**k c**ts! come out f**kers!" and see 3 guys piss off through the bushes and on to the other side of the bushes (the big round about) and hear doors open, doors close, car drive off.

so i call 000 as its the only number i know for the police, i get through and i say my cars broken into, lady sayd "ok do you need police, ambulance...?" and i said police, she puts me through to canberra police. i then speak to some other bloke who then says it isnt an emergency and i need to call 131 444, so i call that number and am on hold for 10 minutes. i hang up and call 000 again, they put me through to canberra and i get an absoloute f**king arogant prick of a pig, this is how the convo went:

Me: "hi yeah need to report a car break in"

Pig: "you need to call 131 444"

Me: "yeah i called that number and was on hold for 10 minutes"

Pig: "you need to hold and wait for an operator as all the operators are busy"

Me: "ok i work on a 24x7 helpdesk and need to be at work..."

Pig: "you need to hold and wait for an operator as all the operators are busy"

Me: (thinking WTF! am i talking to a machine or some shit?!) "how many people are working? how long am i going to be on hold? i need to be at work"

Pig: "that isnt relevant, im terminating this call"

Me: WHAT THE f**k!?!?!?!

Ok so i call 131 444 and go back to the office and am on hold for about 7 minutes. then get someone who says "you need to call 6256 7777" ok then so i call 6256 7777 and am on hold for about 5 minutes and get a lady who is semi helpful and asks for my name, car model, what happened etc... she says she will call back when someone can come out to have a look. i get a call back about 2 minutes later and she says its not something she can deal with, to call 6256 7777 and request for city station... so i call 6256 7777 and am on hold for about 4 minutes and a guy answers "hi i need to be put through to city station" guy says "ok you need to call 131 444" i say "mate ive called 000 ive called 131 444 twice and ive called 6256 7777" so he then goes on to tell me theres nothing they can do, they dont get people to come and look at the car (i didnt touch anything because i thought they DO) and that i need to make a list of everything missing and call them tomorrow. 50 minutes of my life wasted. WOO HOO COPS ARE AWESOME!

so i go back to the car, take some shots with my phone (not too great theres almost no lighting) and park it round the front of allara house.

have had abit of a look and nothings been taken. my head unit is a gay piece of shit JVC and was still there. my turbo timer was still there. my boost gauge was bent up so they obviously tried to take it. only thing ive noticed gone is my big red chewing gum from my centre console. when i get home ill have a thorough look and update this if needed.

so ill be calling just car, which im insured with 3rd party fire+theft and see what they can do for me.

anywho, that was/is my sunday night, how was yours?

Edited by SKYLVIA
Link to comment
https://www.sau.com.au/forums/topic/146763-break-in/
Share on other sites

That bad news man but could have been worse if u didn`t go for some fresh air , cops really don`t care about car break in , i had a car stolen went to the cop shop to report it and almost got arrested the cop was say he wasn`t gunna take the stolen car report as he didn`t think the car was stolen i went OFF my head

What did the junkies look like if u see them again will u know them ?

Link to comment
https://www.sau.com.au/forums/topic/146763-break-in/#findComment-2739918
Share on other sites

What really gets up my nose is that the same f*cking organisation can find time to bust you for doing 10k over the limit, but can't find the time to come out and do some REAL police work. As Gus said, we are treated like the crims all because we upset the cops comfort zone. I could go on and on but it would only be seen as a cop hate diatribe [as opposed to the truth about under performance and lack of service].

BTW Sorry to here Skylvia, I guess you were lucky in a way, damage was minimal.

Link to comment
https://www.sau.com.au/forums/topic/146763-break-in/#findComment-2739940
Share on other sites

ok so im not covered for anything by my insurance company or my work. looks like ill be paying for the window myself...

can anyone recommend some wreckers that would have a drivers side window for a 91 S13? ive called one place in QBN and he said if i pay $100 now he might have one by tomoro, but im not too sure about paying for something he hasnt got... any advise?

oh and called nissan, window to be imported from japan would cost me $1000+ so new window is out of the question...

Edited by SKYLVIA
Link to comment
https://www.sau.com.au/forums/topic/146763-break-in/#findComment-2740147
Share on other sites

yer my sunday night was rad pissed up got with this girl and went to work at 2am lol

sorry to hear man i feel for ya my old ccar was parked on captain cook cres one morning and i come out to finde all my windows smashed and nothing taking not evan my $500 6x9s on the rear parcell shelf

Link to comment
https://www.sau.com.au/forums/topic/146763-break-in/#findComment-2740305
Share on other sites

can anyone recommend some wreckers that would have a drivers side window for a 91 S13? ive called one place in QBN and he said if i pay $100 now he might have one by tomoro, but im not too sure about paying for something he hasnt got... any advise?

Don't go there. If that guys wants your buisiness he'll order you the part, and you'll pay when it arrives.

But I'd suggest looking around the jap wreckers online if you can - should be able to get overnight from Sydney and save yourself a few bucks. :P

Link to comment
https://www.sau.com.au/forums/topic/146763-break-in/#findComment-2740352
Share on other sites

Dude, it completely sucks. I had a similar runaround with the police when my skyline was broken into. The truth is that they don’t care and don’t want to know about it. so much of all that CSI crap. There could be finger prints all over the car, from people who most likely have a criminal record. But they don’t want to know about it.

Any way good luck with getting a window. You could try www.justjap.com

(02) 9545 0532

They have a lot of second hand stuff mainly skylines though

And there’s also jhen auto imports who specialize in spare parts and half cuts

(07) 5593 556

I’ll see if I can find some more for you there are quite a few adverts through all my HPI magazines

Link to comment
https://www.sau.com.au/forums/topic/146763-break-in/#findComment-2740533
Share on other sites

To get a permit you have to be in a gun club and go to a certain number of events each year.

And what good's a baseball bat going to do when you're not near the car?? Someone needs to setup a system where the chassis of the car becomes electrified.....a nice bit of 240v down the line would be good.

Just hope they don't piss all over your car when it gets em!

Actually, what really gets me is apparently alarm systems where you install the siren inside the cabin is illegal??

Link to comment
https://www.sau.com.au/forums/topic/146763-break-in/#findComment-2741565
Share on other sites

Its a dead end situation what ever way you look at it Beau. If the cops had of come and taken prints and the guys were known felons the punishment wouldn't be much at all. They would be out of jail in a few months and probably try track your car down and do much worse then a broken window. If they were under aged then they would probably get off with a warning. And then if you yourself actually caught them and busted a few heads wide open it would be your azz going to jail.

Best thing you can do is get it fixed as cheap as possible and look for a better spot to park - or get a trunk monkey

Link to comment
https://www.sau.com.au/forums/topic/146763-break-in/#findComment-2741767
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I just changed the timing belt on my RB25DET NEO and wanted to get some opinions. I’ve been super cautious, did a lot of research, and took my time. I’ve driven the car, and it runs fine. After warming it up, I revved it to 8000 RPM a few times—no issues, everything held up.   After the drive, I heard a noise that I think is either the clutch or possibly a tight accessory belt. It’s not constant, just comes and goes.   I took the timing cover off to double-check everything:   Belt is on properly, Tensioner is tight, Did the 90-degree twist test—belt isn’t too tight or too loose.     What still worries me is that I noticed the belt seems to sit a little toward the front edge of the gears, especially on the idler pulley. It even looks like it’s slightly coming off the edge there. Is that normal?   My old belt (5 years old, ~3,000 miles) also showed a bit of wear on that same edge, so maybe it’s just how it sits? I’m probably overthinking this, but since it’s my first time doing this on a NEO and the engine is forged, I really don’t want to mess anything up.   Also, I’m thinking of swapping to a clear front timing cover with the glass window. Would you recommend NITO or HPI? HPI looks reputable and their covers have 2.5mm thickness, but not sure if there’s a real difference between the two.   Any advice or reassurance would be much appreciated!
    • 40 grit sounds about right, to start. You make some decent cuts/damage in the coating with that, then rapdily scale up to maybe 80 and 120 for the bulk of the actual removal, then fine it off to 180 or 240 perhaps. No need to go any finer than that, and maybe no need to go even as fine as that. Wrap it on a big block and have at it. At least on the hub face.
    • Do the GKTech rear lower control arm mount relocation, and either alloy subframe inserts or very stiff subframe bushes. Traction is going to be at a premium!
    • Hello,   My name if Frederick, i'm 30 years old and I live in Belgium, Europe! I used to have a Nissan 370z daily but since I got a company car I turned that into my seattime driftcar. About 3 years ago I also wanted something older with more feel, so I got an R32 GTST with an rb26 engine. I am now getting the rb built to have around 800hp and it's close to being finished. I'm very excited for how it will drive and how driveable it will be! Regards, Fred!
    • Appreciate the insight! Talked to some local folks and they basically told me "it's not that deep." As long as the threading on the inside matches what's at the steering rack, everything else can be constructed-to-fit. There are full aftermarket kits I can use - probably better for my car overall since it's lowered.  Example: GKTech M14 Super Adjustable Inner Tie Rod Set - Nissan Skyline R32 R33 R33, 240SX, 300ZX, 350Z / Infiniti G35 M14I-TROD-2 gktM145-TROD gktM14I-TROD - Concept Z Performance (These can be packaged with their "high misalignment" tie rod ends).
×
×
  • Create New...