Jump to content
SAU Community

Recommended Posts

Hi,

on the weekend im installing my car audio stuff into my new R33. Now this is the first skyline ive owned and the boot isnt very big. i have a rear strut brace in the back to. My question is, what is behind the back boot panel? Is it hollow behing there? If i remove the panel will i be able to make the box sit further back so i dont take up so much boot space or is there something behind there? and i jus plan on working around my strut brace.

thanks

Link to comment
https://www.sau.com.au/forums/topic/146803-sub-and-amp-in-boot-question/
Share on other sites

Hi,

on the weekend im installing my car audio stuff into my new R33. Now this is the first skyline ive owned and the boot isnt very big. i have a rear strut brace in the back to. My question is, what is behind the back boot panel? Is it hollow behing there? If i remove the panel will i be able to make the box sit further back so i dont take up so much boot space or is there something behind there? and i jus plan on working around my strut brace.

thanks

just pull the carpet foward and see 4 ya self..

there is battery on left / hicas unit / some fuses and yeh

only thing you could use the space for is mounting / hiding an amplifier to save space

haha umm guess not will c tho...

not a chance... unless you remove everything and somehow relocate it.....

whatever you guys have done with that space upload some pics so i can get some ideas to what to do with my amps...

If you are in sydney, then i suggest you go to marty.. Whos marty.. well the guy who posted above me lol (FHRX) hhehe..

Anyways if got two 10 inch subs, then you might have some trouble mounting them above the fuel pump..

You will be able to squeeze your amp in there tho!!

Or you can always take your space saver out and you gotyour self more room..

I bought a Jaycar 4ch 100wrms amp to replace my bigger amp, because it fits perfectly in there!

Running one 12" sub in a box on the right-hand side of the boot. Well... the entire right-hand side of the boot really! =-/

Hi guys i have made 2 separate boxes measured up perfect to fit one on the left and one on the right for the 2 12" Subs also got some wood too make it my front wall and the Amp which is pretty big too (Rockford P4004) is drilled to it looks pretty good too, really simple doesn't leave room for anything else thou ;) i may have a photo if you don't know what i am talking about.

John

^ he meant that he puts different types of 10inch woofers in there..

Not two of them in that spot..

if you get what i mean??

yeh lol a was a bit tired then.. big night... haha tks for clearing it up...

im gonna mount my amps in there... well 1... my alpine amp will have to be shown

you spend enough on some stereo stuff you want some of it to be shown...

:-P

I got some info from the thread mentioned above and put my amp over the fuel tank and 12" Sub in the right rear corner, fibreglassed up a seald box for it. Didn't come up too bad and haven't lost much space.

post-13456-1166256072.jpg post-13456-1166256094.jpg

I got some info from the thread mentioned above and put my amp over the fuel tank and 12" Sub in the right rear corner, fibreglassed up a seald box for it. Didn't come up too bad and haven't lost much space.

post-13456-1166256072.jpg post-13456-1166256094.jpg

hey man whered you get this custom sub box???

is this a good position to recieve bass in the front cabin..?

are you using 1 of these?

what would happen if you used 2 of these boxes 1 either side... would their be any cancellation or what?

i need these sub boxes!

how does that 1 type s 12 sound?

i am contemplating 1 type r 12 or maybe 2

I don't have any pics, but i have a two amps mounted in that space. I have my 12" Sub in a separate box in the boot... lol i stapled Velcro onto the bottom of the box and it just sticks to the carpet in the boot (which is glues + stapled to the board thing that covers the space-saver) and stops it sliding around.

got 1 x pioneer 12inch + 1 x pioneer 800w amp... threw the space saver away amp gets mounted on some wood and cut to a circular shape (so it sits perfectly at the bottom of the spare wheel well) and thrown in there then the carpet crap that covers that goes on top then sub in middle :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have no hard data to report, but I have to say, having driven it to work and back all week, mostly on wet roads (and therefore mostly not able to contemplate anything too outrageous anywhere)..... it is real good. I turned the boost controller on, with duty cycle set to 10% (which may not be enough to actually increase the boost), and the start boost set to 15 psi. That should keep the gate unpressurised until at least 15 psi. And rolling at 80 in 5th, which is <2k rpm, going to WOT sees the MAP go +ve even before it crosses 2k and it has >5 psi by the time it hits 90 km/h. That's still <<2.5k rpm, so I think it's actually doing really well. Because of all the not-quite-ideal things that have been in place since the turbo first went on, it felt laggy. It's actually not. The response appears to be as good as you could hope for with a highflow.
    • Or just put in a 1JZ, and sell me the NEO head 😎
    • Oh, it's been done. You just run a wire out there and back. But they have been known to do coolant temp sensors, MAP sensors, etc. They're not silly (at Regency Park) and know what's what with all the different cars.
    • Please ignore I found the right way of installing it thanks
    • There are advantages, and disadvantages to remapping the factory.   The factory runs billions of different maps, to account for sooooo many variables, especially when you bring in things like constantly variable cams etc. By remapping all those maps appropriately, you can get the car to drive so damn nicely, and very much so like it does from the factory. This means it can utilise a LOT of weird things in the maps, to alter how it drives in situations like cruise on a freeway, and how that will get your fuel economy right down.   I haven't seen an aftermarket ECU that truly has THAT MANY adjustable parameters. EG, the VAG ECUs are somewhere around 2,000 different tables for it to work out what to do at any one point in time. So for a vehicle being daily driven etc, I see this as a great advantage, but it does mean spending a bit more time, and with a tuner who really knows that ECU.   On the flip side, an aftermarket ECU, in something like a weekender, or a proper race car, torque based tuning IMO doesn't make that much sense. In those scenarios you're not out there hunting down stuff like "the best way to minimise fuel usage at minor power so that we can go from 8L/100km to 7.3L/100km. You're more worried about it being ready to make as much freaking power as possible when you step back on the loud pedal as you come out of turn 2, not waiting the extra 100ms for all the cams to adjust etc. So in this scenario, realistically you tune the motor to make power, based on the load. People will then play with things like throttle response, and drive by wire mapping to get it more "driveable".   Funnily enough, I was watching something Finnegans Garage, and he has a huge blown Hemi in a 9 second 1955 Chev that is road registered. To make it more driveable on the road recently, they started testing blocking up the intake with kids footballs, to effectively reduce air flow when they're on the road, and make the throttle less touchy and more driveable. Plus some other weird shit the yankee aftermarket ECUs do. Made me think of Kinks R34...
×
×
  • Create New...