Jump to content
SAU Community

Recommended Posts

here is what i have for sale out of a wreck r33 gtst with 76,000km

2 x 8 spoke 16" DRIFT wheels with crappy rubber mulitfit ...........

1 x Diff complete

1 x rear calipers and discs

1 x HICAS 4ws unit

1 x Left Hand Rear Tail Light

1 x rear bar

2 x rear rio

1 x series 1 back seat

1 x complete set of complianced seat belts

2 x rear side panels Left & Right

2 x kick panels

1 x complete carpet

1 x hand brake lever unit

2 x rear wipers including motor

1 x pair of sunvisors

2 x roof center lights

2 x roof lights that sit in between sunvisors section

1 x rear cradel

1 x steering rack

1 x K Frame

1 x Steering Coloumn

1 x rear vision mirror

1 x boot lid with brackets and gas struts small dint

1 x fuel lid

1 x skyline rear garnish

1 x pair rear stock shocks and springs

1 x clock spring for airbag models

1 x ignition barrel with key

1 x indicator/wiper stalk

1 x gtst clutch/brake/accelrator pedal box complete

1 x gtst cluch cyclinder

1 x gtst brake cyclinder

1 x gtst fuel pump

1 x accelrator cable

alot more will add as things go....... ALL OF THESE ITEMS ARE GOING CHEAP SO YOU GIVE ME THE AMOUNT U WANT TO PAY AND IT WILL BE YOURS WITH ALITTLE NEGO!!!! GRAB SOME CHEAP STUFF GOTTA GO CLEARING UP ALL THE UN NEEDED STUFF.......

Edited by SXC_R33
Link to comment
https://www.sau.com.au/forums/topic/147094-r33-gtst-parts-4-sale/
Share on other sites

hey, do you have the driver side door control unit, for the windows and locking as well.. i need the hole unit, the control part and the computer box that attatch to it.. should look like this but with the computer cliped to the bottom..

series 1 and series 2 should be the same with this part right/? thanx

post-21353-1165966019.jpg

Edited by seriesII

sorri i dont have the black plastic surround u guys require

The carpet is black in colour

in regards to the ashtray i might have i will pm u if i can find it!! cheers

guys offers offers offers its gotta go.......need to clean up

hi how much wold u be settling for just the frame of the gearbox e.g the leather and the plastic covering? and also the handbrake leather?

and do u have any badges left i would realli like a skyline S badge

complete diff disc to disc gimme an offer and its urs i dont know what these things are worth

intercooler pipping i have got stock 1..... i am in keilor

ZAS i dont have what ur after sorri

call me if u want 0402090079

Edited by SXC_R33
hey, do you have the driver side door control unit, for the windows and locking as well.. i need the hole unit, the control part and the computer box that attatch to it.. should look like this but with the computer cliped to the bottom..

series 1 and series 2 should be the same with this part right/? thanx

Actually there are 3 differant types and one wont work with another :)

Closed.

When are people going to read the rules?

Prices must be listed for all parts being sold!

Moderators are tired of having to continually ask people that completely ignore the rules of the classifieds.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...