Jump to content
SAU Community

Recommended Posts

I have decided to sell my car to buy myself something a bit more practical (I'm getting old *sigh*).

I have babied this car since day one, and can attest that the previous owner has done the same. The car has been stripped out (ie: no carpet, rear seats, rear trim) for weight reduction purposes. This is not your 'go to the shops for milk' kind of car, it has been purpose built for serious driving!

The car makes around 350rwhp @ 1bar (pulls hard!), the motor is super responsive and has never skipped a beat. I have only ever used top shelf fluids for it (eg Motul 300v) and have serviced it every 3000-4000km's. The car is mechanically A1.

The car handles absolutely awesome and stops on a dime. The paint is the ORIGINAL factory black which reflects the level of care this car has received throughout its life. The chassis has 103,000km's on it. Interior as pictured below is immaculate for its age (No dash bubbles!). The car has a couple minor scratches here and there, I will enthusiastically point out EVERY single thing wrong with this car to the potential buyer (and there is not much wrong with it!).

Myself and the previous owner have only used high quality brand name components, you will not find any China on my car.

The car is currently unregistered, although it has been fully complied (this car came in under the 15yr rule btw) and fitted with new Brigestone Potenza G3 tyres. To pass the pits it would require a bonnet swap to stock, bonnet pins removed, stock exhaust fitted and a cat fitted (both of which I have already).

Whether it be drift, drag or track work this is a car that can do well in all fields.

I am asking $18,500 UNREGISTERED or $19,500 REGISTERED (I will be running the car over the pits on the 29th).

Tire kickers and test pilots need not apply! If your after a ****ter, look elsewhere :O

I am happy to answer any queries you may have. Those who are genuinely interested may contact me via mobile or email: 0406-956-073 or [email protected]

Engine Hardware

1990 RB26DETT engine (Engine conversion performed in Japan)

R32 GTR FMIC

Brand new APEXi Super power Intake air filters

GREDDY SS Intercooler piping kit

NISMO Fuel pump

R32 GT-R Radiator

3” Turbo back stainless exhaust

3” Stainless de-cat pipe

Aftermarket front pipe

Mines Tuned ROM

Driveline

R32 GTR 5spd Gearbox (new transfer case installed).

Short shifter kit

OS Giken twin plate clutch with lightened flywheel

Two-Way mechanical LSD

HICAS lock bar

Brakes and Suspension

EBC Brake pads

R32 GT-R rotors

R32 GT-R calipers

TEIN HR suspension

Aftermarket rear cradle bushes + upper bushes

CUSCO type OS front and rear strut braces

R32 GT-R rear sway bar

Interior and miscellaneous modifications

KUROMORI lightweight 6-point BOLT IN roll cage (I run only the rear half cage to stay compliant)

BRIDE ZETA 3 sport drivers seat

GREDDY PROFEC B electronic boost controller

GREDDY 60mm electronic boost gauge

GREDDY 60mm electronic fuel pressure gauge

GREDDY turbo timer

ATC 320mm steering wheel + boss kit

Drift handbrake knob

Alpine MDA-W900J head unit

PIAA windscreen wipers

3 Point immobilizer Alarm installed

Rolling Stock

Blitz Type 01 CX 17” wheels

Bolt on wheel spacers

Near new Bridgestone Potenza G3 ZR tires F: 215/45 R: 225/45

Bodywork

FRP fiberglass reverse vented bonnet (has developed a little bit of a warp due to the heat (quoted $350 from Fibrevision to fix this).

Bonnet pins

Rear guards professionally rolled

Brand new ORIGIN Stylish Line side steps

Final KONNEXION rear bumper

R32 GTR N1 bumper

R32 GTR N1 headlights with HID

4edithm6.jpg

5dh6.jpg

dsc0002ae9.jpg

p4280048em4.jpg

dsc0026eg5.jpg

interiorwc1.jpg

interior2oh9.jpg

interiorstrippedqu5.jpg

outside2croppedbg7.jpg

Edited by Remix-
Link to comment
https://www.sau.com.au/forums/topic/147169-rb26dett-powered-r32-gts-4-skyline/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...