Jump to content
SAU Community

Recommended Posts

Hey, i recall reading that certain skyline engines have issues with atmo bov's. I'm currently in the market for a bov but don't wanna shell out money for something that's gonna cause issues with my engine.

Any suggestions on what bov to get for the RB20det? Is there an option on some bov's to switch them to plumback if the atmo venting is causing problems?

Thanks

EDIT: Also, does a plumback blow off valve make an audible noise while driving? If it doesn't, then i guess i may aswell stick to the stock one for now?

Edited by D3LTR33
Link to comment
https://www.sau.com.au/forums/topic/147798-bov-on-rb20det/
Share on other sites

The only issue (noticeable issue that is) my RB20det has with the atmo bov is that if you try to hold the revs around 4000rpm it flips out and jerks around a lot, like it gets air then doesnt, then gets air, then doesnt etc.

It is a Sard R2D2 and I have no stalling/idling issues.

P.S. It will be for sale as soon as I get the standard bov back on :(

Link to comment
https://www.sau.com.au/forums/topic/147798-bov-on-rb20det/#findComment-2758197
Share on other sites

The only issue (noticeable issue that is) my RB20det has with the atmo bov is that if you try to hold the revs around 4000rpm it flips out and jerks around a lot, like it gets air then doesnt, then gets air, then doesnt etc.

It is a Sard R2D2 and I have no stalling/idling issues.

P.S. It will be for sale as soon as I get the standard bov back on :(

Approximately how much will it be for sale for?

Link to comment
https://www.sau.com.au/forums/topic/147798-bov-on-rb20det/#findComment-2759297
Share on other sites

People have issues mainly dependant on driving style.

I know some people that have issues, and some that dont. But they drive differently to each other.

So take the chance if you feel the need.

Just to note: there is no performance gain by removing the stock one, just to clear that one for you

Link to comment
https://www.sau.com.au/forums/topic/147798-bov-on-rb20det/#findComment-2759321
Share on other sites

1. Keep the stock BOV.

2. Yes some aftermarket BOV have both atmo and plumb back outlets.

3. PLumb back BOV (including the stock one) make a noise when driving, especially if a pod filter is fitted too.

Link to comment
https://www.sau.com.au/forums/topic/147798-bov-on-rb20det/#findComment-2760005
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...