Jump to content
SAU Community

Recommended Posts

With an emergency call from my boss Im off to Adelaide in like 50 mins.

Lucky me..

Anyone at the aiport say hi... and I will be stuck round there for a couple of hours so if anyone wants to do a quick dinner let me know! 0411063927

Would be nice to meet some of the SAU SA guys

Ciao!

Link to comment
https://www.sau.com.au/forums/topic/148217-im-off-to-adelaide-now/
Share on other sites

Welcome to Adelaide.

Sorry I am nowhere near the Airport (assuming you get to read this before you return)

Shops are open tonight for shopping (until 3am I think), You can do shopping at Harbour town (factory outlets) which is right next to the airport, or go into town and shop in Rundle Street

Plenty of nice restaurants in the city in Hindley Street, Gouger Street are all nice.

Edited by 4door_Sleeper

um hello welcome :O

Welcome to Adelaide.

Sorry I am nowhere near the Airport (assuming you get to read this before you return)

Shops are open tonight for shopping (until 3pm I think), You can do shopping at Harbour town (factory outlets) which is right next to the airport, or go into town and shop in Rundle Street

Plenty of nice restaurants in the city in Hindley Street, Gouger Street are all nice.

do you mean 3am 4door_sleeper :P

Um... welcome to Radelaide... impressed? didnt think so... :ninja:

Not really its too hot.. And no one seems to wanna take me out for an hour or two :)

Stupid taxi driver actually driving the limit.. sesh what is this world coming too!

Hello and welcome! You must be at that place just down/next to the Austral Pub! Hey tis a bit muggy today, not the best!

Im at an internet cafe across from gilbert pl???

near the heritage saloon bar???

i went for a farewell lunch for a few people at work at the lemongrass thai restaurant... the food there is thumbs f**ken up, get the number 40 with kangaroo meat somehting like 11 bucks and u get plenty and its a grade meat... lol

how far is that place from the seedy internet cafe that corinne decided to venture into? 189 rundle st is the restaurant.

Edited by Pauly33GTS-t

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...