Jump to content
SAU Community

R33 Gts-t Bits And Pieces

Col-GTSX
 Share

Recommended Posts

Col-GTSX Grand Master

Col-GTSX

Posted
Posted (edited)

Hey guys...

Im currentlly mid modification in doing my GT30 high mount so i have all the bits for sale that i dont need...

I also dropped a spanner down my front guard and took two massive chips out of the paint :cry: so I need more money to fix that...

I have the following for sale and a few pics at the bottom of some of the stuff...

1. R33 GTS-T Series 2 Turbo

It is in execptional condition and has only travelled just on 80,000kms.

The wheels are very clean with no chips and like i said in tip top condition.

It has the nylon Series 2 compressor the fastest spooling of all stok turbos.

SOLD

2. Exhaust Manifold

Not much to say about this as there is nothing to them.

It is in good condition with no cracks.

Price $70 $50 $30

3. Standard Intake pipe from AFM to Turbo (comes with the bov dump pipe and crank case vent pipe also)

Good condition, not needed with upgrade.

SOLD

4. Standard Brake Rotors

Good condition

Replaced them with slotted rotors for race use.

Price $100 $80 $60

5. Standard Brake pads (90% meat)

Full set front and rear for Series 2 R33

SOLD

6. Standard Clutch & pressure plate (60-70% meat)

The clutch is a standard Nissan part, was put in car in Nov 04, went 5000-6000kms before being replaced with a twin plate.

$150 $75

7. Split Exhaust Dump pipe

Twin dump pipe for standard R32/33/34 turbo

Worked great and helped with pick up off gear changes

It also has an extra tap in for an exhaust temp sender, but if you dont need it just block it off with a capped nut.

SOLD

8. R33 GTS-T Series 2 Injectors

6 x Standard Injectors - 2 of which have broken caps - All in good working order

Price $300 $150 $75

9. Banjo fittings & rear gasket

As picture shows below, all in tip top condition

SOLD

10. 1 x HKS Adjustable Timing Gear (suits all rb's)

The new one with the purple centre and the silver outer...

Dont need it as i have HKS cams now...

Used it for 3000km's

SOLD

11. R33 GTS-T Series 2 Stock ECU

I have a pfc so i dont need it...

Price $200 $150 $100

12. Series 2 AFM (3 Wire)

Comes with plug and short amount of wire.

Replaced it with a Z32

Perfect Condition

Price $100 $80

13. Stock R32 AFM

Price $100 $80 $60

14. Just Jap R33 Engine dampner

Blue in colour, does nto fit now with new plenium in place

Will fit all R33 GTS and GTS-T's from 93-98

Comes complete and in very good condition

SOLD

15. Stock R33 BOV

SOLD

16. Coil Packs x 6 (Series 2 R33 only)

Standard units, upgraded for split fire units

SOLD

All interstate buyers are responcable for any postage costs...

Local delievery/pickup in the Brisbane Area...

Here are some photos...

post-2979-1166683671.jpg

post-2979-1166683686.jpg

post-2979-1166683699.jpg

post-2979-1166683716.jpg

post-2979-1166683738.jpg

post-2979-1166683757.jpg

post-2979-1166683793.jpg

post-2979-1166683809.jpg

post-2979-1167621914.jpg

post-2979-1167621941.jpg

post-2979-1167622115.jpg

post-2979-1167622138.jpg

Edited by Col-GTSX
Link to comment
https://www.sau.com.au/forums/topic/148263-r33-gts-t-bits-and-pieces/
Share on other sites
Col-GTSX Grand Master

Col-GTSX

Posted
  • Author
Posted

7 PM's for the dump pipe and all returned and all calls returned...

4 PM's for the turbo have been replyed also...

3 PM's for the clutch

& 1 for the brake pads...

OMG... All that and still not sold, first in best dressed people...

Prices are fair and obviouslly very cheap to get this much attention in such a short time...

Please dont insult me with $100 offers for the turbo...

$500 is firm on the turbo as it is in exceptional condition...

Col-GTSX Grand Master

Col-GTSX

Posted
  • Author
Posted

Hey guys, sorry bout the late reply, xmas and all...

how much more power would just that upgrade give?

It will basiclly flow more air you should expect a good extra 15rwkw at 10psi over standard R32 trubo at 10psi...

hey man is that cam gear for ex or in side, tenx put up some pics eyy!

The cam gears are the same, so you can use it on either the exhaust or inlet...

It looks like this....

13197_hks%20cam%20gear.jpg

pm sent

Reply'ed

will the r32 dump pipe bolt on to the r33 turbo?

yes, they are the same...

Col-GTSX Grand Master

Col-GTSX

Posted
  • Author
Posted

Nope... You may have to replace the silicon pipe that goes from the turbo to the intercooler tho as i found my 32 one was pretty stiff and not very flexiable anymore...

But other than that its bolt in and out...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • aznriptide859
      How To: "Refabricate" a Stagea 260RS/R33 GTR Speedo Sensor

      By aznriptide859 · Posted

      Yes the gear for the R33/34 is different, it is red and has a different number of teeth. My part didn't come with that gear though, so I don't know how many teeth are on the red one. You'd have to reuse the 260RS/R33 gear, as long as it's not destroyed.   Haha, as unfortunate as that might be it was working fine for about the first 1500km I've had the car for now.
    • sinn3r
      R34 Skyline climate control unit transistor

      By sinn3r · Posted

      Update all   thanks to the workshop manual, it lead me back to checking fuses as mentioned central locking and door open lights worked when acc was switched on. diagram attached shows two points of power 1. ACC and 2.  Batt with the later being fused (#28) I did check the fuses using a multimeter but I must have stuffed that up also. Went back and checked the batt fuse in interior fuse box and you wouldn’t believe it… a blown fuse. replaced fuse and everything is now working as it should including the climate control   thank you all with your positive insight and knowledge.    
    • MBS206
      Lock up the old for sale / wtb threads.

      By MBS206 · Posted

      Where is the warning "That this thread is super old"   I just went into a 5 year old thread, went to do a reply, and couldn't see anywhere obvious a warning of it being super old
    • Rezz
      WGNC34 - floor mats

      By Rezz · Posted

      Duncan is correct. Pitwork (and Toyota's own cheap brand "Drive Joy") were primarily created as brands to sell other manufacturers car parts. It would be weird if Nissan sold parts for Toyota vehicles with a Nissan logo on it, so they created Pitwork to sell parts for other brans Toyota, Honda etc. They are not the same as Nissan genuine parts, although they *do* meet Nissan's standards for replacement parts. They aren't supposed to be a substitute for genuine parts, but a cheaper alternative that is better than Ebay fake parts from you-know-where.
    • Ozdavroz
      Starting again

      By Ozdavroz · Posted

      Thanks GTSBoy, much easier to work with it now it's free!  
×
×
  • Create New...