Jump to content
SAU Community

Recommended Posts

  • Replies 6k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I wanna sell this mspec one, so that I can get a gtr one.

I hear ya, I had the same problem, sell the Mspec, I ended up buying a 400R without the side vents and without the little squares near number plate, looks well fatter without those vents, but i chose that over the GTR, both nice bars!!

SR20 jap power!!!!

I hope my car will own 180's after the mods.

but what ifyou spend that money on a 180, wont the 180 be even more sick.

I think the 33 is the nicer and more comfortable road car, and you'll have plenty of power after the mods u are doing

SR20 jap power!!!!

I hope my car will own 180's after the mods.

but what ifyou spend that money on a 180, wont the 180 be even more sick.

i know for a fact after your mods its more than likely that you will own the 33. but want to run me in the 180?

:werd: 180 imo has the shittiest interior. made for track for sure.

I like 180s, but i would much rather drive my 33, heaps more comfy car to be in, if i was a total drift-head i woulda got a 180 (and i almost did) but chances are i woulda stacked it by now

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...