Jump to content
SAU Community

Recommended Posts

Greddy Profec E-01

[

Cons:

Trying to find a place to put that screen and running all the cables neatly... (mission and a half this was)

Can you please post a pic of where/how you mounted it stan? I'm still deciding on whether to get this...

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Can you please post a pic of where/how you mounted it stan? I'm still deciding on whether to get this...

Me too! I'm hoping to mount it with a bracket connected inside the ashtray (R34). My calculations show it will just cover just a bit of the double DIN unit above, hopefully not too much.

But now that I found out the E-01 does not program / monitor the E-Manage Ultimate I'm questioning buying the E-01 at all.

I am using the Blitz SBC III. boosting 24psi through it, hasnt spiked once. easy to use and instructions in english. on my lancer evo (my GF's actually) ive put a turbonetics bleed valve, seems to hold 19psi fairly well.

Getting a photo for Kennedy and JustinP now...

JustinP; I thought that the E-01 was Ultimate compatible; sure it's not just a optional harness that you need?

No I think it is only compatable with the original blue E-Manage, this has been confirmed by two different people who sell them. I would love to be proved wrong though as it is the only thing stopping me from going and ordering one right now!

Pics would be much appreciated :yes:

Edited by JustinP

28122006034dm6.th.jpg

28122006033qs2.th.jpg

28122006032cw5.th.jpg

28122006031sx8.th.jpg

28122006030tt8.th.jpg

* Photos courtesy of Mitchell Smith *

As you can see the bracket is only there as a "hook" and is not fixed. The second last photo shows the vent loosened to emphasize it's not permanently stuck there.

28122006034dm6.th.jpg

28122006033qs2.th.jpg

28122006032cw5.th.jpg

28122006031sx8.th.jpg

28122006030tt8.th.jpg

* Photos courtesy of Mitchell Smith *

As you can see the bracket is only there as a "hook" and is not fixed. The second last photo shows the vent loosened to emphasize it's not permanently stuck there.

Thanks for the pics! That thing is huge! Don't know if I could fit it down low in front of the ashtray :/ It's quite thick too.

^^ Sinista: Are you saying that you could fit it inside the DIN pocket underneath the main DIN slot for the stereo? This is really what I'd like to do if I was to get one.

The biggest con I can see with the AVC-R is if you go from an internal to an external wastegate. Apparently there's 2 versions, 1 for each type. I don't know what you have to go though to convert from 1 to the other if at all possible.

Satanic: That E-01 really is huge there's no way I'm having that monolith in my car, good job on the install though. When's someone gonna come up with EBC that can link into a standard DVD touch screen? Now that would be real stealth.

Edited by JazzaR33

Yes; to all those who have said that the E-01 is a mammoth of a device, you are not far off... we must've spent a good few days deciding where to put that screen.

It's a more popular boost controller with the EVO community and they have come up with some nice places to mount it.

JazzaR33; what would be awesome would be the type of system that parralels with the HKS CAMP system. Ultimate stealth for everything.

"Hybrid Dual Stage Electronic Boost Controller

Cost:

$250

Pros:

Cheap, Easy to Install (kinda), Easy to Use

Cons:

No control over GAIN etc that you get with a good EBC

Does not monitor boost levels and compensate for drop off

Nothing more than a electronic solenoid

Experience; could not hold 1 bar, kept dropping a good 5PSI"

im running the same as above, but 24PSI, had to change the wastegate spring so the controller didnt have to bleed off so much.

have found ramping up of boost varies a little, between 380kw to 416.9kw

Cool... question; did you have the EBC wired up in Open / Closed loop?

My Hybrid fell on its ass when we removed the AFM and could not run it with that signal (main cause of the EBC not working)

The biggest con I can see with the AVC-R is if you go from an internal to an external wastegate. Apparently there's 2 versions, 1 for each type. I don't know what you have to go though to convert from 1 to the other if at all possible.

Its the same EBC whether you are running an external or integral wastegate. There are 3 ports on the solenoid and the wastegate type that you are running determines which of the two ports you connect to and use. I have had the same AVC-R run my std turbo and my TD06 with external gate.

Had 2 Blitz Sbc id3's in the past and they worked extremely well. This time Im going to probabley either go the new HKS which I have heard is wonderful, or the Greddy profec spec b 2 I have a friend running 30psi thru it and it holds boost extremely well and doesnt spike. Other good thing is it looks like a turbo timer and is easy to tuck away from cops.

If anyone has used the JAYCAR electronic boost controller with the stock solenoid could you please post up your comments on this set up? I think SK used this in a stagea at some stage?

i used one of these. if your looking for something with every variable adjustable, then this is it.

PROS:

-can adjust the solenoids operational frequency, no other boost controller i know of allows this

-can adjust 'gain' through the whole rev range (through adjustable duty cycle of solenoid), not just for the boost build up/spool area like all jap controllers do, this allows for example, a higher boost setting for the midrange then the top end, which i find very good.. again i dont know of any other controller which allows this

-cheap compared to most other ebc's

-held boost really well when setup properly\

-has 2 complete MAPS for the boost curve, which you choose between with a simple switch. its possible to hook this switch up to give different boost maps for different gears, say map 'low' for gear 1 and 2, and map 'high' for all others etc.

CONS:

-it takes time, patience, and a bit of thinking to get it setup properly, quite tedious

-have to build, although debateable as to whether this is a downside ;)

-not as flash looking as ready built jap ebc's

-lacks a feedback system, so spiking did occur on higher gears, although a change of solenoid frequency could have fixed this, but i never got around to trying it.

Edited by mokompri

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...