Jump to content
SAU Community

Recommended Posts

If Anyone can help me I was looking for some information about the ENR34 2000 non turbo model AWD system as I am thinking about purchasing this car. What I wanted to know, is it the attesa? system or constant AWD and does anyone know of any way to disable the front wheels like you can on the attesa system? Any help would be good

Link to comment
https://www.sau.com.au/forums/topic/148899-enr34-awd-system/
Share on other sites

I would put money on it being the attessa system. Nissan wouldn't R&D a new symeterical AWD system for the lower end of their market.

I scratch my head everytime someone asks how to disable the attessa system, I mean once you do - you really have a GTS with a heavy front end. One day I plan on owning my own GTR, and their is no way I would be changing the AWD system thats had millions of dollars spent in R&D on how it reacts to conditions, to adjust it to a backyarders idea of how it should perform.

Cheers

Sumo

sometimes its handy to be rwd for a bit
It's RWD most of the time! AWD is only engaged under certain conditions, like cornering, or rear-wheel slip.

Frankly, if you don't like the idea of Nissan's AWD system, don't get a car with it fitted; get a plain old common-or-garden RWD, like a Falcodore.

It's RWD most of the time! AWD is only engaged under certain conditions, like cornering, or rear-wheel slip.

Frankly, if you don't like the idea of Nissan's AWD system, don't get a car with it fitted; get a plain old common-or-garden RWD, like a Falcodore.

sometimes its nice to STAY in rwd

I would put money on it being the attessa system. Nissan wouldn't R&D a new symeterical AWD system for the lower end of their market.

I scratch my head everytime someone asks how to disable the attessa system, I mean once you do - you really have a GTS with a heavy front end. One day I plan on owning my own GTR, and their is no way I would be changing the AWD system thats had millions of dollars spent in R&D on how it reacts to conditions, to adjust it to a backyarders idea of how it should perform.

Cheers

Sumo

Oh okay cause I was under the impression that the attesa system was electronically initiated, and I heard that you can just remove the fuse to disable the attesa system which sends all the power to the rear wheels, with no front wheel drive at all. Also you can just install a switch which enables you to turn of the attesa, I'm not really sure if this is true or what? but if so thats great.

Oh okay cause I was under the impression that the attesa system was electronically initiated, and I heard that you can just remove the fuse to disable the attesa system which sends all the power to the rear wheels, with no front wheel drive at all.
I'm pretty sure that only works with the R32s. If you do that on a 33 or 34, they go into "limp home" mode.
Also you can just install a switch which enables you to turn of the attesa, I'm not really sure if this is true or what? but if so thats great.
Which is why someone worked out that the switch by-passes the "limp home" function.
actually when u pull the fuse on the r32's it compltely kill the front wheels, but the r33 and r34 the clutch pack is tightened by a spring (or somethign along those lines). basicly they will still be in rwd mode when u pull the fuse.

I'm sorry I don't really undestand can you explain in dumbas language I don't know much about cars.

I'll put it simply for you as everyone else seems to be avoiding giving you an answer.

The R34 25GT FOUR does in fact use ATESSA. They are a great car and if you don't want something fast and like the idea of 4WD would be a great car.

Why bother disabiling the atessa? it's not like he's gonna drift it, and it ain't a crazy performance car so you should be fine.

If you want it to be RWD nissan also make model that is only RWD, therefore you will win either way.

Personally a 4 door auto with 4WD sounds like an awesome car to me.

  • 1 month later...

Hey Guys,

Sorry to dig up an old thread, but had some questions relating to the ENR34, Particualr the 2 Door, Manual, AWD version.

1. Is the drivetrain out of a r33GTR? or more similar to a stagea RSFour.

2. Would it be as simiple as drop in a rb26 and instant GTR?

Thanks

Mario

Hey Guys,

Sorry to dig up an old thread, but had some questions relating to the ENR34, Particualr the 2 Door, Manual, AWD version.

1. Is the drivetrain out of a r33GTR? or more similar to a stagea RSFour.

2. Would it be as simiple as drop in a rb26 and instant GTR?

Thanks

Mario

I have a 2 door, manual r34 gt-four (had it about 2months now) and not many people really know the facts about their set-up, and this is only what i have found after reading up but mostly just driving the car.

1. Yes it uses the same atessa system as the gtr (which is only the computer side of things)

2. No its not a gtr gearbox, its definately not the r34 gtr box cause thats 6 spd, and the gt-four just doesnt "feel" strong like a gtr box, i would say its more along the lines internally of a rb25de box (same as a rb20det) or maybe a rb25det with the obvious casing changes to attach a transfer box.

3. No you cannot pull a fuse and turn it into rwd, that ONLY works for the r32's. Like previously said the car will go into a limp mode. Driving around like this will damage the front diffs clutches. Apparently you can disconnect the front shafts and it will go to rwd but the amont of effort to do it, just by a gtst.

4. HKS torque splitters can be fitted to adjust how much power is distributed to the front and rear. There is NO way to turn all the power to the rear, even with maximum power set to the rear, there will still be about 5% of the power still being sent to the front diff, which means no sitting on the brakes doing a big trev skid.

Although, with about 95% of the power going to the rear, that should be enough to step out around corners.

5. At the stock power level, the car just feels safe to drive in the dry around any corner. I can boot first gear take a 90 degree bend while smashing second and the ass end will attempt to come out but then the front just grips and puts you straight ahead, the car will understeer before it oversteers into a corner.

The wet is another story, since it is mainly rwd it will go VERY sideways if pushed but its a very easily controlled sideways since you can always feel the front helping you stay in control. So pretty much what i'm saying is if you want to go "drifting" like intial D in this car wait till its wet, go to somewhere quite, and have all the fun then, otherwise get a gtst.

6. The rb26 can bolt straight up and id say that once that was done, even in the dry the awd system will be smoking all fours around corners. A more budjet friendly solution is to get a stegea neo rb25det, change the front diff over with the stock gtfour one and your have a 206kw motor in your car cheap. Another good reason to go the stegea motor is that you stock gtfour harness will bolt up and the r34 ecu is flashable so you can get it retuned without spending dollars on a new ecu or piggy back.

Im planning to put a stagea motor in my car, and the more i learn about the gt-four i will post up cause its a bit of a mystery...

Edited by R34GTFOUR
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey crew, Failed my WOF cause of a lower control arm, and I've decided to hit both arms, and also the compression rods at the same time(seems they're gonna be the most likely upcoming failure points from some discussions with the lads over on the G35 reddit). I've looking at these form Z1:  https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-compression-rod-p-40716.html https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-lower-control-arm-p-40674.html I asked Z1 if they'd work as it's the same platform, just RHD vs LHD. I basically got told "Lol dunno". Specifically they aren't aware of any difference but can't guarantee fitment as they haven't done it on a 350GT. So guess I'm asking is if there is any issues with using 2005 G35 coupe suspension parts on a 2005 350GT coupe? Orginally I thought it could be something in the way of the arms that each control arm is designed to be positioned around, but that'd be an engineering nightmare for Nissan needing two different shaped control arms 😅
    • ^ This. The mode door actuator is a common failure, as is the actuator and/or the actual valve for the coolant flow control valve. I also don't know how available the mode door actuator is these days. I've been meaning to look into it and get one from wherever is possible, to keep in the shed for the rainy day when mine eventually fails. Anyway, the advice to you is to search the usual NOS part supply places, or even just go to Nissan and see what they list.
    • Have you got a pic of the actuator? My guess is that unit has failed internally and was flopping around, so the previous engineer who owned it forced it to be fully open to cold air (blocking the heater core path). As far as you can tell, is anything else wrong in the system? Likely you just need a new actuator (not sure how available they are) and then "installation is the reverse of disassembly"
    • I'm happy with the Lsailt unit that I put in, it puts full Android on the top screen so you can run whatever Nav and other Apps you want, while still existing inside the factory functionality like automatic reverse cams, audio input switching, retains factory bluetooth etc. Not cheap and the install was moderate (not simple, not hard) Yours is a V36 not V37 though right?
    • Yeap, all the NC's that I originally looked at that had a hard top were PRHT, which makes the roof line look horrible, hence why I said nope to them My only caveat for another MX5 was it needed to have a hard top, and initially I didn't think you could get a detachable hard top for the NC,  like my NB had Again, a big thanks to Matty for helping me source the detachable hard top for my little girl, they are as rare as hens teeth in Australia, and the few people who have them, keep them Also to Greg, for initially pointing me in the NC direction NC PRHT 🤢🤮 Not mine (I really should take more photos of my car), but a NC with the detachable hard top 😁 To me, the difference in how the detachable hard top roof line looks, and how it actually follows the bodies lines, like they do on NA's and NB's, is chalk and cheese compared to the bulbous looking PRHT  
×
×
  • Create New...