Jump to content
SAU Community

no BOV = anyproblems??


Recommended Posts

well as its a stock one.....it looks nothing like an aftermarket one. not sure about 32's but on a 33 they're this ugly small grey roundish thing thats attatched to one of the intake pipes. follow ur intake pipes and there should be something odd bolted onto it:D as u say your hearing a whistling sound after lettin go of the gas its best bet that thats the sound of ur bov...doesnt matter if its auto too.....my friend had a 32 auto.

Guest RaBZ3174

oh ok thanks alot man..yea i think thats y i didnt think there was a BOV cauz it didnt look like an aftermarket one and didnt generate as much noise as my freinds r33..although i still ran him off the rd.. im gonna go look for the grey roundish ugly thing :P thanks alot mr fanny!!!

if theres no affect on the motor through a BOV why then do most factory turbo cars have BOV's stock?

AFAIK thier there to improve response by decreasing the chance of backpressure slowing the compressor when the throttle is slammed shut.

or boost spikes?

I put my aftermarket BOV on so i could have something quieter than the stock one. My old stock one used to make a HEAP of noise (probly because of my air filter pod) and was really sensitive.

Whenever i came on boost with the stock bov i couldnt hear the motor underneath the sound of air rushing. Aftermarket BOV has reduced the noise by over 50 percent id say, now all i hear is the howl of 6 lovely RB cylinders. Not sure if all 32 bovs were as bad as my one or if mine had a problem. But its better by far now.

Red17

kwazza: i think u've missunderstood. i dont think anyone here said that having no bov wont do anything to ur engine. just reinforcing to Rabz that his car and all gts-t's have stock blow off valves...be it auto or manual. Predator and i were just saying from opinion that an aftermarket one's over the stock one wont give u any great performance gains.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Block bump. $400. As above cyl 6 needs bore or sleeve.
    • I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...