Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

meh, if you're worried about commie drivers giving you a hurry along just go to an auto electrician and get them to wire up a seperate switch/button for your brake lights, so if they are tailgating you just flick it and on come your brake lights :no:.

Or just drive purposefully and painfully slow

Personally i'm not going to be getting the Bee*R rev limiter for fancy flames or popping noises, and you need to remove your cat to get the flames i believe (correct me if im wrong), but, having a microtech i don't really have a rev limiter, so i'd like one :( for safety's sake.

  • 1 year later...

Digging up a year old thread (sorry)...

I'm curious to know that if you have a switch setup on the clutch pedal for 'Rev2' on the Bee*r limiter and the limit for Rev2 is set to say 4000rpm, what happens when you are about to hit normal limit of 7000rpm and engage the clutch to change gears. Would this not jolt the engine back to 4000rpm and cause issues??

if you want a launch interface get the gizzmo other wise forget it... its (bee-r) crude and evil if not setup properly.

buy the BEE-r if you like to make pointless noise, and break shit.

Thanks guys,

I'm not actually after a launch interface, and I already have the Bee-R limiter... I just couldn't understand how you could run a microswitch on the clutch in the following situation:

Rev1 = 7000rpm

Rev2 = 4000rpm

Current revs 6500rpm, depress clutch, engine attempts to ign cut back to 4000rpm, just think it would be quite a large jolt just for the potential to flat shift..

I have the Bee-R installed because of all the skidpan and motorkhana days coming up and I hate fuel cut...

Yes i can enable to launch controll setting on the power fc for RB25 and RB26. The ECU does support it but its not configurable with Datalogit.

How it works is that it limits the revs to whatever RPM you want it set to untill it reaches a speed of what you want it set to.

I think its a fuel cut launch controll as well :thumbsup:

I might have a play with it.

Yes i can enable to launch controll setting on the power fc for RB25 and RB26. The ECU does support it but its not configurable with Datalogit.

How it works is that it limits the revs to whatever RPM you want it set to untill it reaches a speed of what you want it set to.

I think its a fuel cut launch controll as well :P

I might have a play with it.

that is wicked!

If you get it working I would be happy to work out some deal with you so that i can have it enabled on mine! :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...