Jump to content
SAU Community

Recommended Posts

Even though i've had my car for a couple months, today was the first time i filled right up. But once i did, and the lever clicked to tell me i was full, i notice petrol dripping from underneath the tank...i was like wtf. No fuel came overflowing from the filler cap. Do the tanks have an overflow thing or something?? : So i then turned the car on and after a about 5 minutes the dripping eased up. What could be wrong with the tank? split? The car is R32 GTS-t.

Any help appreciated,

Scott

Link to comment
https://www.sau.com.au/forums/topic/14971-first-time-fill-tank-up/
Share on other sites

It could also, and most probably be, a f@rked seal on the tank. It is not normal for the petrol to drip out for 5 min. on the floor, not to mention dangerous. Hate to make you feel bad but better be safe than sorry.

When i got my company van (already 3yrs old, from new) i noticed that after filling the tank, to full, petrol would drip out the bottom. I decided to have a look one day and got on the floor, while at the station. The petrol wasn't coming out of a 'over flow pipe' and the leak appeared to start up high (out of sight). Told my boss to book it in for a check. The MERC. dealership was surprised to find the seal stuffed, especially on a 3yr old van.

Sorry about the story but just speaking from experience.

PS: if your seals are stuffed (due to the car's age) vapours can be escaping out of the tank, thus you are loosing petrol. NOT TO MENTION THAT VAPOURS ARE THE MOST LIKELY CAUSE OF A PETROL EXPLOSSION. For your safety i would get it checked out properly, by asking your mechanic to remove the tank and inspect it.

My 2c

Alan

actually the first time i filled my car up, it kept clicking like every litre, so what happend as i was filling it up and i let it click one to many times and the petrol splashed up my hand and down my leg.

i have found that if you don't put the nozzle right it it doesn't click as often :(

not related but hey :)

Originally posted by a5h

actually the first time i filled my car up, it kept clicking like every litre, so what happend as i was filling it up and i let it click one to many times and the petrol splashed up my hand and down my leg.

try another servo....I've had the same thing happen at certain servo's, takes bloody ages to fill up the car :mad: but at other servo's it's fine. So I just avoid the ones that keep clicking off now :)

I fill up at the same station, same bowser every week. I fill it until it clicks and then just slowly fill it until i reach even dolars (usually another 0.5-1.0 Litres).

In the end its around 60ish Litres.

Find a good pump and stick to it is my theory.

I've found out that there is a problem with my tank, cuz i got someone to tail me on the road and whenever i turned sharply, fuel would piss out from somewhere. The only thing i've got done to the car around the tank area was installed a high flow pump. Could it just be the seal around near the filler cap?

Regards,

Scott.

Now it looks like i've spoted the problem...and an easy one to fix. I took off the plastic inner guard on the rear left wheel and discover that the breather pipe had come off the connection to the inside of the filler cap. It's got me ****ed on how it came off...

Scott.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - there is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
    • no one recommending speedtek gearsets?   i'm in the same boat as Cosline but rwd, I am holding boost back in third to 600nm at the hubs to save the gear as i make nearly 750nm at the hubs on a mainline
×
×
  • Create New...