Jump to content
SAU Community

Recommended Posts

you want some one to install them? or you want knowledge on how to install? i got a boost gauge from just jap , and i have to say its really accurate , and piss easy to install.

I want someone to install them for me...

Its not the boost that Im that worried about.

More the other 2 air fuel and water temp.

dude search the DIY . im sure there is something there , it wouldnt be that hard . there are instructions in the box for sure , try reading them . its not that hard to do . !! . you can find anything on the internet dude .

or if you are that worried about screwing them up , maybe go to a workshop , but then again your gonna be charged a fair bit for a little job

cheers

when adding the water temp, dont you have to add the sensor between the thermostat and the inlet of the radiator, and not just tap it into the OEM sensor on the thermostat housing, cause it will stop sending a signal to the dash???

True

Yes, some have a dual adaptor for the senders or some kind of sandwich plate.

Dan, any good tuning place should be able to do this easy for you

I'd be interested to know How to install them in my factory R34 centre console triple guage cluster.

I too have bought the 3 guage bundle. I got the boost guage, oil temp & A/F ratio.

Anybody here installed guages in the factory R34 cluster or knows where I can get it done?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...