Jump to content
SAU Community

Recommended Posts

haha,

I forgot 3" exhaust

How hard are these things to remove

Gauges I can take off myself, do you need to remove the associated cabling aswell to pass regency?

Blow off valve and exhaust I will have to get removed at a shop, and replaced with stock

Suspension? can I simply have it raised or do I need to remove adjustable shocks and replace with stock?

Link to comment
https://www.sau.com.au/forums/topic/150440-defect/#findComment-2801471
Share on other sites

3" Exhaust..

Get a coke can and chop it up to the flange shape. Then drill a few large holes in the sucker. Silicon it all up place it behind the cat. Wait for it to dry then run a bit of grease and oil in to it and get it hot to make it look a little aged. >_<

Link to comment
https://www.sau.com.au/forums/topic/150440-defect/#findComment-2801519
Share on other sites

all depends what sort of suspension you have, if they are adjustable platform coilovers then you can wind them up but still have the risk of them not going through becauase coilovers are illegal, however when my 33 came over from japland my coilovers went through ok.

most of them time, if your guages are below the dash line then theyll be ok, keep tread on your rears, not too low, not too loud, dont be stupid on the road and they'll be ok about it

Link to comment
https://www.sau.com.au/forums/topic/150440-defect/#findComment-2801595
Share on other sites

If this is you Mick, give me a holla and i'll give you a run down. And if you have bought a skyline, fly around sometime -> doing the speed limit that is :)

btw..has it got a defect, or you just asking? as most have written, most likely everything, and depending on how they're feeling at regency

Link to comment
https://www.sau.com.au/forums/topic/150440-defect/#findComment-2802027
Share on other sites

i know the legal hight is 360mm,need stock plenum,NO bov doesnt matter if its plum back,no fuel regulators list goes on and on and on i was there yesterday aas i got defected for tint and boost gauge..

really because i have my boost gauge mounted on my dash, beside the stereo. i hvae had my car defected twice

during my defect saga. there has never been any attention on the boost gauge.

more attention on abs, rear wheel steering and engine emissions... :laugh::D:(:):)

Link to comment
https://www.sau.com.au/forums/topic/150440-defect/#findComment-2806505
Share on other sites

Plum back bov is a std piece of equipment and must be in along with all piping and recirc. hoses...

Aftermarket bov's are not allowed.

The same as what I was told... The afm to turbo pipe, cross over pipe, the std bov and its pipework cannot be touched. FMIC is allowed providing there's no cutting of the body and it doesn't hang lower than 100mm.

Link to comment
https://www.sau.com.au/forums/topic/150440-defect/#findComment-2808556
Share on other sites

Hey Guys,

Wot in SA do the cops defect u 4. I have moster tach, shift light, boost gauge, blow off valve, adjustable suspension (now low).

if it is a brand new exaust you should of got a silencer with your rear muffler otherwise known as the cannon wich passes you through regency as i have just passed with a 4 1/4 hiflow exhaust system

and bassically everything in which you listed in your last quote i got done for as well not to mention the rest.

let us know if you ever need to borrow a silencer.

Link to comment
https://www.sau.com.au/forums/topic/150440-defect/#findComment-2812146
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...