Jump to content
SAU Community

Recommended Posts

Guest INASNT
Originally posted by predator666

russcb007: thats a pretty good idea.. i had a standard set of springs but unfortunately had to sell them for some $. Have a standard set of wheels around if anybody needs them for any purpose..  

yeah, but isn't the whole idea they are testing the emissions.. not just which doovas they have which might change the emissions?? In other words, they don't really care what your car has takked onto it, as long as the emission reading (and noise) is legal. Isn't that the whole idea of the test?

using logic yes, but its the epa so..

basically they dont want u to change the factory setting even tho it might actually run cleaner with an aftermarket ecu and intake mods!

Link to comment
https://www.sau.com.au/forums/topic/15089-epa-action/page/2/#findComment-307605
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

alright, when you say that its best for the engine bay to look as stock as possible, does that mean that if there is a big a/f turbo sitting there that you gonna be fncked or what?

also with fmic, do they look for them or if it was black and covered with mesh they wouldnt even know?

what if you put the top of the standard air box over a pod?

Link to comment
https://www.sau.com.au/forums/topic/15089-epa-action/page/2/#findComment-308438
Share on other sites

Originally posted by INASNT

using logic yes, but its the epa so..

basically they dont want u to change the factory setting even tho it might actually run cleaner with an aftermarket ecu and intake mods!

but if its engineered it would be fine? aaiight

Link to comment
https://www.sau.com.au/forums/topic/15089-epa-action/page/2/#findComment-308611
Share on other sites

My thoughts on EPA...

I had to take my 32 there last year for heaps of reasons..... They're not stupid and will spot all of the following:

ANY sort of boost controller - trust me I spent ages hiding mine and he spoted it in 2 minutes

Any sort of oiled filters are ILLEGAL

Only allowed 1 inlet modification, filter or cooler or inlet plenum etc etc... but not more than one

Removable silencers are passable if the securing bolt is welded in

ANY sort of air/fuel or timing controllers are illegal, and they frequently remove the kick panel to check ECU and wiring associated with it.

When I went over and passed, I had FMIC, non-oiled pod Filter, 300ZX AFM, custom chip in my ecu, welded in silencer (89.8 db with silencer!!!), and a high flowed VG30 turbo.... the only thing they picked was two inlet mods but let it passed anyway. My chip passed emmisions test with flying colours... they even commented that it was way below the maximum allowed and heaps less than most other skylines....

Good Luck with your test...

Doc.

Link to comment
https://www.sau.com.au/forums/topic/15089-epa-action/page/2/#findComment-308713
Share on other sites

Originally posted by KamikazeR33

but if its engineered it would be fine? aaiight

NO!

engineers approval and EPA approval are two separate things.

Engineers is for brake/suspension/diff etc etc.

mods that don't affect Emissions.

EPA test (worth $2,500+) is the emissions test to get it approved (if you want) with the alterations like zorst/safc/boost/big turbs etc etc.

If you fail you don't get a refund or a second chance.

Same test that all new car models must go through.

I'm gonna look at doing it to mine once i'm finished in a few years. That way the cops can't defect you for anything as it get's the EPA approval with all mods listed (same as engineers)

I've said this all before so i'm not going to go into more detail.

Link to comment
https://www.sau.com.au/forums/topic/15089-epa-action/page/2/#findComment-310027
Share on other sites

mmm... nice indeed.

that's why they pin you for not being stock - safc's and boost controllers and stuff.

ha!

wish it was that simple as them doing it while you are there!

but i think to get the cert. there are more test's to go through.

Link to comment
https://www.sau.com.au/forums/topic/15089-epa-action/page/2/#findComment-310041
Share on other sites

First of all,

Guys stop kiding yourself, these guys that work there arnt fools!

Covering a FMIC with some mesh isnt going to cover it, when i got done and went down to mcloed(spelling) i disconnected my Turbosmart boost controller (incabin) and wraped the hoses around the wiper leads. The barsted opend my bonnet and that was the first thing he looked at, then he said "$500 fine if that was connected". THen he opend my airbox, checked my intake for BOVs, followed all intake tubing/hoses . Then he checked exhaust/cat and done the DB test, checked CO/2 levels. then said nothing here, see ya later son! (10-12MINS)

Change you exhaust to a stocky, check your cat, replace your stock air element, and change your oil if your really para. Then after the EPA take your exhuast OFF, air cleaner out, Hell stick a mega huge triple trumpet BOV and roar past there with you plates fliped up! :shake:

*** you EPA & junior cun*tibles pricks i hope your reading this, you may be able to inconvineince us, but youl never be able to stop us.

Link to comment
https://www.sau.com.au/forums/topic/15089-epa-action/page/2/#findComment-317624
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...